Abstract:Ultra-wideband (UWB) technology is widely used in many communication scenarios. However, narrowband systems can easily interfere with the UWB system, which generates multipath fading. In order to solve these interferences and meet the design requirements of high isolation of multiple-input multiple-output (MIMO) antennas, two MIMO antennas with double-notch structures are designed. Firstly, two U-shaped slots are etched on the radiating patch and feeder to achieve notch characteristics in WiMAX and ITU bands. Using this antenna element, a two-element antenna is put symmetrically in parallel, and two rectangular branches are loaded to improve the isolation. The size is 0.57λ × 0.32λ × 0.013λ (at 2.5 GHz). Then, a four-element antenna is designed to meet the requirements for another application; here, each element is placed orthogonally to each other, and the isolation is improved through loading a cross-shaped branch in the middle of these elements. The size is 0.57λ × 0.57λ × 0.013λ. Both antenna samples are tested to verify the design. Measurement results show that the working bandwidth is 2.45–14.88 GHz and 2.14–14.95 GHz, the isolation is greater than 17 and 20 dB, and the peak gain is 5.7 and 5.9 dBi for the two- and four-element MIMO antenna, respectively. Compared to the references, the designed antennas have a wider bandwidth and a higher gain and radiation efficiency. They are well-suited for diverse wireless applications.

PER Performance Enhancement Through Antenna and Transceiver Co-Design for Multi-Band OFDM UWB Communication

Performance of Intra-Chip Wireless Interconnect Using On-Chip Antennas and UWB Radios

Investigation of Parallel and Quadrature MIMO Antennas with Double-Notched Structure for UWB Applications

Robust Transceiver Optimization for Multi-Antenna Multi-Carrier Multi-Hop Communications

Performance Analysis and Enhancement of Multiband OFDM for UWB Communications

Equilateral Triangular Dielectric Resonator and Metal Patch Hybrid Antenna for UWB Application

An RF Transmitter Front-End Implementation in 0.18&#x03bc;m CMOS for OFDM-UWB

An Rf Transmitter Front-End Implementation In 0.18 Mu M Cmos For Ofdm-Uwb

Improving the Performance of Long Reach UOWC With Multiband DFT-Spread DMT

Performance Study of a High-Rate Multiuser Transmitted Reference Ultra-Wideband Transceiver

An Optimized Multi-Band Antenna for UWB Ad-Hoc Network Based on Topology Optimization Theory

A Robust Cmos Rf Front-End Design for 3.1-4.8Ghz Mb-Ofdm Uwb System

Performance Comparison of Multi-band UWB-OFDM System Between Two Different Modulation Techniques

Investigation of Parallel and Orthogonal MIMO Antennas with Two-Notched Structures for Ultra-Wideband Application

UWB transceiver circuits design for WPANs applications

A 13.3 Mw 500 Mb/s IR-UWB Transceiver with Link Margin Enhancement Technique for Meter-Range Communications

Power allocation for multi-band OFDM UWB communication networks

A high efficiency robust IR-UWB receiver design for high data rate CM-range communications

Impulse Uwb Antenna Size Reduction Due To Transmitter-Antenna Co-Design

Chip-Package and Antenna Co-Design of a Tunable UWB Transmitter in System-on-Package with On-Chip versus Off-Chip Passives

Consideration of Pre-Filter Bandwidth Optimization for Non-Coherent UWB Receiver