Abstract:Copper nickel materials are used for their corrosion resistance due to the protective film that forms in seawater. The development of this film over time depends on the exposure condition, and it is critically important to understand the aging process for CuNi components used in marine systems to ensure passivity under sulfide contaminated conditions. Here we study the formation of the protective film over time and its effect on corrosion performance. Electrochemical impedance spectroscopy (EIS) measurements during exposure are used to develop a model of film growth on CuNi 70/30 alloys. These electrochemical measurements are coupled with surface analytical techniques such as glow discharge-optical emission spectroscopy (GD-OES) and X-ray photoelectron spectroscopy (XPS) to characterize the composition of the surface oxide. GD-OES results show that as the protective layer forms, nickel mainly remains at the metal surface and the outer layers are copper enriched oxides and chlorides. There is also incorporation of various elements from the seawater within the film. The rate of this film growth is correlated to the resulting decrease in corrosion rate. Different exposure conditions, such as under flow, are investigated. The translation of these protective film mechanisms to additively manufactured CuNi materials is also of interest, to ensure similar performance with these materials. Evaluating corrosion performance of these newly developed materials involves careful comparison to existing knowledge of film growth and potential for breakdown.

ELECTROCHEMICAL CORROSION BEHAVIOR OF 90/10 Cu-Ni ALLOY IN FLOWING SEAWATER

Influence of Ni Addition on Corrosion Performance of Medium-temperature Filler Metal with Low Cu Content for Al Brazed Joints

Insight to corrosion mechanism of 90/10 copper-nickel alloys under different sea depths

Long-Term Corrosion Behavior of Cu-10Ni and Cu-20Ni Alloys in Simulated Seawater

Corrosion of Copper-Nickel Alloys in Seawater-Based Electrolytes

Electrochemical Corrosion Behavior of Cu-15Ni-8Sn Alloy in Marine Microbial Medium

Corrosion Behavior of Ni/NiCr/NiCrAlSi Composite Coating on Copper for Application as a Heat Exchanger in Sea Water

Insight into the corrosion susceptibility and failure mechanism of Cu-Ni alloy pipeline welded joints in simulated marine environment

Study on the Effects of Fluid Parameters on Erosion-Enhanced Corrosion of 90/10 Copper–Nickel Alloy Using Wire Beam Electrode

Clarifying the effect of Cu element on the corrosion properties of Ni-Mo low alloy steel in marine environment

Multiscale characterization of seawater pipe erosion of B10 copper-nickel alloy welded joints

Corrosion Resistance of Cu-Ni-Si Alloy Under High-Temperature, High-Pressure H2S and Cl− Environments

Erosion-corrosion behavior of Ni-Al-Cu coating on nickel-aluminium bronze alloy in 3.5 wt.% NaCl solution

Corrosion Evolution of Nickel Aluminum Bronze in Clean and Sulfide-Polluted Solutions

Erosion-corrosion behavior of Nickel based alloys in supercritical water oxidation environment

A Study on the Local Corrosion Behavior and Mechanism of Electroless Ni-P Coatings under Flow by Using a Wire Beam Electrode

Effect of Fluid Flow on the Corrosion Performance of as-Cast and Heat-Treated Nickel Aluminum Bronze Alloy (UNS C95800) in Saline Solution

Corrosion Properties of a Novel Bulk Cu0.5NiAlCoCrFeSi Glassy Alloy in 288 °C High-Purity Water

ELECTROCHEMICAL FEATURES OF THE CORROSION OF AN ALUMINUM-LITHIUM ALLOY IN 3.0% NaCl SOLUTION

Corrosion behavior and electrochemical properties of carbon steel, commercial pure titanium, copper and copper–aluminum–nickel alloy in 3.5% sodium chloride containing sulfide ions

Electrochemical corrosion behavior of high strength steel in simulated deep-sea environment under different hydrostatic pressure