Abstract:Y2O3-stabilized-ZrO2(YSZ)/La0.8Sr0.2MnO3-α(LSM)–YSZ dual-layer hollow fibers have been fabricated for micro-tubular solid oxide fuel cells (MT-SOFCs) using a co-spinning/co-sintering technique. The hollow fibers consist of a dense YSZ top layer supported on the porous LSM–YSZ substrate with an asymmetric structure. The electrolyte and the cathode layers are perfectly adhered to each other without observable elemental inter-diffusion. Both the mechanical strength of the hollow fibers and the compactness of the electrolyte layer are improved by increasing the sintering temperature, whereas the effective porosity of the cathode layer also decreases. The suitable sintering temperature of the YSZ/LSM–YSZ dual-layer hollow fibers to construct the electrolyte/cathode half-cells should be controlled between 1350 °C and 1400 °C. An Ni-YSZ layer of about 5 μm in thickness is dip-coated on the outer surface of the hollow fibers to serve as the anode of fuel cells. The resultant micro-tubular SOFCs yield a maximum power density of 290 mW cm−2 at 850 °C using 1.49 × 10−5 mol s−1 hydrogen as fuel and 2.23 × 10−5 mol s−1 air as oxidant, respectively. The output performance of the micro-tubular fuel cells is mainly limited by the high polarization resistance of the cathode.

FABRICATION AND PERFORMANCE OF WHOLE MEMBRANE -COMPONENT MICRO SOLID OXIDE FUEL CELL ON SOLID POROUS SUPPORT

Fabrication and Performance Test of Solid Oxide Fuel Cells with Screen-Printed Yttria-Stabilized Zirconia Electrolyte Membranes

A High-Strength Solid Oxide Fuel Cell Supported by an Ordered Porous Cathode Membrane

Anode-supported Solid Oxide Fuel Cell Based on Dense Electrolyte Membrane Fabricated by Filter-Coating

Development and Fabrication of A New Concept Planar-Tubular Solid Oxide Fuel Cell (Pt-Sofc)

Fabrication and Characterization of an Anode-Supported Hollow Fiber SOFC

Fabrication of Anode Supported Micro Tubular SOFCS by Dip-Coating Process on NiO/YSZ Hollow Fibers

Metal Supported Solid Oxide Fuel Cells with Infiltrated Nanoelectrodes

Solid Oxide Fuel Cells with Dense Yttria-Stabilized Zirconia Electrolyte Membranes Fabricated by a Dry Pressing Process

Preparation and Characteristics of Anode-Supported Solid Oxide Fuel Cells by Wet Ceramic Powder Process

An anode-supported hollow fiber solid oxide fuel cell with (Pr0.5Nd0.5)0.7Sr0.3MnO3-δ-YSZ composite cathode

Effect of Composite Pore-Former on the Fabrication and Performance of Anode-Supported Membranes for SOFCs

Fabrication and Performance of Cone-Shaped Segmented-In-Series Solid Oxide Fuel Cells

Fabrication of anode-supported Sc2O3-stabilized-ZrO2 electrolyte micro-tubular Solid Oxide Fuel Cell by phase-inversion and dip-coating

Micro-Tubular Solid Oxide Fuel Cells with Graded Anodes Fabricated with A Phase Inversion Method

Fabrication of nanoscale yttria stabilized zirconia for solid oxide fuel cell

Fabrication of Y2O3-stabilized-ZrO 2(YSZ)/La0.8Sr0.2MnO3-α-YSZ dual-layer hollow fibers for the cathode-supported micro-tubular solid oxide fuel cells by a co-spinning/co-sintering technique

Metal-supported Solid Oxide Fuel Cells with In-Situ Sintered (bi2o3)0.7(er2o3)0.3–ag Composite Cathode

High Performance Solid Oxide Fuel Cells Based on Tri-Layer Yttria-Stabilized Zirconia by Low Temperature Sintering Process

Performance of Anode-Supported Single-Chamber Solid Oxide Fuel Cells

Thin Yttria-Stabilized Zirconia Electrolyte and Transition Layers Fabricated by Particle Suspension Spray