Abstract:Micro electrical discharge machining(EDM) deposition process is a new micro machining method for fabrication of metal micro structures. In this process, the high level of tool electrode wear is used to achieve the metal material deposition. Up to now, the studies of micro EDM deposition process focused mainly on the researches of deposition process, namely the effects of discharge parameters in deposition process on the deposition rate or deposition quality. The research of the formation of micro structures with different discharge energy density still lacks. With proper conditions and only by the z-axis feeding in vertical direction, a novel shape of micro spiral structure can be deposited, with 0.11 mm in wire diameter, 0.20 mm in outside diameter, and 3.78 mm in height. Then some new deposition strategies including angular deposition and against the gravity deposition were also successful. In order to find the forming mechanism of the spiral structures, the numerical simulation of the transient temperature distribution on the discharge point was conducted by using the finite-element method(FEM). The results show that there are two major factors lead to the forming of the spiral structures. One is the different material removal form of tool electrode according with the discharge energy density, the other is the influenced degree of the movement of the removed material particles in the discharge gap. The more the energy density in single discharge is, the smaller the mass of the removed material particles is, and the easier the movements of which will be changed to form an order tendency. The fine texture characteristics of the deposited micro spiral structures were analyzed by the energy spectrum analysis and the metallographic analysis. It shows that the components of the deposited material are almost the same as those of the tool electrode. Moreover the deposited material has the brass metallic luster in the longitudinal profile and has compact bonding with the base material. This research is useful to understand the micro-process of micro EDM deposition better and helpful to increase the controllability of the new EDM method for fabrication of micro structures.

Research on micro structure using EDM deposition

Fabrication of Micro Structure Using EDM Deposition

A Micro-Deposition Method by Using EDM

Research on Processing Law of Micro-EDD in Air

Micro EDM deposition in air

Study on Micro Reversible Electrical Discharge Machining Method for the Fabrication of Micro Structures

Micro EDM deposition by using brass wire electrode in air

Micro Electrical Discharge Machining Deposition in Air for Fabrication of Micro Spiral Structures

Technique of Brass Spiral Structure Deposition Using Micro EDM in Gas

Micro EDM depositing technology

Research on micro spiral structure using EDM deposition in air

A New Micromachining Method Based On Micro Edm For Fabrication Of Micro Structures

Brass Deposition Using Micro EDM in Air

The Effects of Discharge Parameters on the Surface Morphology of Nickel Microspheres by Edm Combined with Ultrasonic Field

Research of micro-EDM and its applications

Micro EDM Deposition in Air by Single Discharge Thermo Simulation

Research on a Micro EDM Equipment and Its Application

Research on a Micro-EDM System and Its Techniques

Experimental Study of Micro-Electrode Array by Micro-Wedm

Micro Electrical Discharge Machining of Ultrafine Particle Type Tungsten Carbide Using Dielectrics Mixed with Various Powders

A study of micro-EDM and micro-ECM combined milling for 3D metallic micro-structures