Abstract:In recent years, with the prohibition of CFC by international community, the cascade refrigeration cycle is showing the development of new features, in which Auto-cascade refrigeration cycle with its simple structure, reliable performance particularly has aroused widespread concern. This paper puts forward using the distillation column instead of the multi-stage segregation device, which make full use of the distillation column to provide good enough conditions for the vapour-liquid contact,creat a greater contact surface, ensure the space and time of heat and mass transfer between each component of refrigerant and lubricant, in order to achieve high efficient separation.This cycle uses environment-friendly non-azeotropic mixed (NARM) R600a\R23\R50 as refrigerant. The improved PT equation is used, according to the quality and energy conservation of the distillation column and heat exchanger to carry on thermodynamic analysis. On this basis, the selection and the calculation of the experimental apparatus and equipment carried out to self-made a auto-cascade refrigeration cycle prototype. Through the cooling test of the eight different mixture ratio, the best quality ratio is found and the minimum temperature the ratio can reach. Through repeated experiments, study that the cycle compression ratio of one component affect on the temperature inside the ultra-low temperature box, the cycle compression ratio of the different components under the same temperature inside the ultra-low temperature box affect on the system performance, and the three throttle, cold boxes cycle high and low pressure ratio and distillation column reflux liquid extraction rate affect on the system performance. The prototype broke the traditional method that access to the depth refrigeration needs multiple refrigeration compressors, only use a single-stage air-conditioning refrigeration compressor with lubrication, to achieve high and low boiling point component through the use of distillation devices, including high-performance lubricant separation, successfully reduced to below -80 degrees C, and system stability. According to the results of a series of experiments, analyzed the ratio of working fluid, cycle pressure ratio, distillation column extraction rate of liquid return, increase heat and the expenditure component's effect on the temperature in the ultra-low temperature box and the COP of system.

PREPARATION OF L-DRB/A10 CLOSED REFRIGERATOR OIL

STUDY ON L-DRB/A15 FULL-CLOSED REFRIGERATOR OIL

Influences of Cold Intermediary R12, R600a on the Flock Point of Refrigerator Oil DRB/A32

A Bench Evaluation Test For Refrigeration Oils In A Refrigeration System Using A Screw Compressor

Research progress of the compatibility between alternative refrigerant/oil and materials

Research on Compatibility Between Ethyl Fluoride With/without Lubricant Oils, and Plastics and Elastomers

Preparation of Nanorefrigeration Oil and Applied in Rotor Compressor

A Study On A New Auto-Cascade Refrigerating Cycle

Design for separation efficiency test stand of oil separator used in compressors

Impaction of nano-NiFe2O4 refrigeration oil on rotary compressors using in the air-conditioning system

Performance of a Single-Stage Linde-Hampson Refrigerator Operating with Binary Refrigerants at the Temperature Level of −60 °C

Performance Study of a Domestic Refrigerator Using R-134a/mineral Oil/nano-Tio2 As Working Fluid.

A New Experimental Rig of Testing Flow Boiling Heat Transfer of Refrigerant and Lubricant Mixture

Experimental investigation on the mutual solubility of R134a/R290 with lubricant

Experimental Investigation of Oil Retention and Pressure Drop of R32/PVE Oil Mixture in Compressor Suction Line

Thermophysical Properties of R32/advanced PVE Mixture and Parametric Analysis on Oil Transport Characteristic of Compressor Suction Line

Solvent denitrogenating of lube base oil

Preparation and Performance Evaluation of an Environmentally Friendly Lubricant for Water-based Drilling fluid

Mixtures of Lubricants and Ecological Refrigerants under Starved Lubrication Conditions

Reciprocating Compressor using Nano Refrigeration Oil that n-NiFe2 O4 and Onion-like Fullerenes as Additives of KFR22

Research & Application of New Refrigerant and Compressor Design