Abstract:In recent years, with the prohibition of CFC by international community, the cascade refrigeration cycle is showing the development of new features, in which Auto-cascade refrigeration cycle with its simple structure, reliable performance particularly has aroused widespread concern. This paper puts forward using the distillation column instead of the multi-stage segregation device, which make full use of the distillation column to provide good enough conditions for the vapour-liquid contact,creat a greater contact surface, ensure the space and time of heat and mass transfer between each component of refrigerant and lubricant, in order to achieve high efficient separation.This cycle uses environment-friendly non-azeotropic mixed (NARM) R600a\R23\R50 as refrigerant. The improved PT equation is used, according to the quality and energy conservation of the distillation column and heat exchanger to carry on thermodynamic analysis. On this basis, the selection and the calculation of the experimental apparatus and equipment carried out to self-made a auto-cascade refrigeration cycle prototype. Through the cooling test of the eight different mixture ratio, the best quality ratio is found and the minimum temperature the ratio can reach. Through repeated experiments, study that the cycle compression ratio of one component affect on the temperature inside the ultra-low temperature box, the cycle compression ratio of the different components under the same temperature inside the ultra-low temperature box affect on the system performance, and the three throttle, cold boxes cycle high and low pressure ratio and distillation column reflux liquid extraction rate affect on the system performance. The prototype broke the traditional method that access to the depth refrigeration needs multiple refrigeration compressors, only use a single-stage air-conditioning refrigeration compressor with lubrication, to achieve high and low boiling point component through the use of distillation devices, including high-performance lubricant separation, successfully reduced to below -80 degrees C, and system stability. According to the results of a series of experiments, analyzed the ratio of working fluid, cycle pressure ratio, distillation column extraction rate of liquid return, increase heat and the expenditure component's effect on the temperature in the ultra-low temperature box and the COP of system.

STUDY ON L-DRB/A15 FULL-CLOSED REFRIGERATOR OIL

PREPARATION OF L-DRB/A10 CLOSED REFRIGERATOR OIL

Influences of Cold Intermediary R12, R600a on the Flock Point of Refrigerator Oil DRB/A32

Preliminary study on the performance of the diffusion absorption refrigerator operating with the mixed refrigerant

Research progress of the compatibility between alternative refrigerant/oil and materials

Theoretical and experimental study on a novel mixture refrigerant of R161 +R227ea

Theoretical studies on new refrigerant in refrigeration system for freeze and cold storage

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

Experimental study of ternary mixture R32/R125/R161 as alternative refrigerant to R407C

Study on Flow Boiling Heat Transfer Characteristics of R161/oil Mixture Inside Horizontal Micro-Fin Tube

Research on Compatibility Between Ethyl Fluoride With/without Lubricant Oils, and Plastics and Elastomers

A Standard Test Method of the Cycling Performance of Refrigerants and Its Application Research

Experimental study on the cycle performance of refrigerant R32

EXPERIMENTAL STUDY ON A NEW TYPE ABSORPTION REFRIGERATION SYSTEM

EXPERIMENTAL STUDY ON A NEW ABSORPTION REFRIGERATION SYSTEM USING R134a+R32/DMF

A Study On A New Auto-Cascade Refrigerating Cycle

On-road performance analysis of R134a/R600a/R290 refrigerant mixture in an automobile air-conditioning system with mineral oil as lubricant

Performance of a Single-Stage Linde-Hampson Refrigerator Operating with Binary Refrigerants at the Temperature Level of −60 °C

OPTIMIZATION OF THE PERFORMANCE OF AN AUTO-CASCADE REFRIGERATOR WITH A LIQUID-GAS SEPARATOR USING ENVIRONMENTALLY BENIGN BINARY REFRIGERANTS

Simulations and experiments of substitution of R41 for R23 in auto-cascade refrigeration cycle with rectifying column at -60℃

A Numerical Investigation of A Diffusion Absorption Refrigerator Operating with the Binary Refrigerant for Low Temperature Applications