Wedge-splitting tests for tensile strength and fracture toughness of concrete
J.F. Guan,X.Z. Hu,C.P. Xie,Q.B. Li,Z.M. Wu
DOI: https://doi.org/10.1016/j.tafmec.2017.09.006
IF: 4.374
2018-02-01
Theoretical and Applied Fracture Mechanics
Abstract:This study presents a new approach for determination of tensile strength f t and fracture toughness K IC of concrete using wedge-splitting (WS) specimens as neither property can be easily measured because of the heterogeneous material structures. The Boundary Effect Model (BEM) was extended to WS geometry and relevant equations were derived so that more concrete properties can be determined by the load and displacement measurements. The new model considers the influence of coarse aggregate structures on concrete fracture by linking the fictitious crack growth Δa fic at peak load P max to the maximum aggregate size d max. The random aggregate distribution and inevitable variations in Δa fic and P max are considered by a discrete number β. WS results of concrete specimens with d max from 10mm to 25mm and specimen size W from 150mm to 1200mm reported in literature are analyzed for a range of β from around 0.2 to 2.0. It is found that on average β ≈1 is a good approximation for common WS specimens with W/d max <20. Then reliable f t and K IC, which is the asymptotic limit for a large structure with a long crack, can be obtained, regardless whether WS specimens are geometrically similar, or have the same size but different notch lengths. Finally, it is concluded that quasi-brittle fracture of concrete is fully predicted if both K IC and f t are known.
engineering, mechanical,mechanics