Abstract:Flotation machines and flotation columns are widely used as separation equipment for coal sludge. In order to obtain better flotation results for different particle sizes, the bubble distribution and size in the flow field need to be studied. In this paper, a novel three-phase fluidized bed flotation column (TFC) was designed, and the shear effect of liquid velocity (0.198 m/s, 0.226 m/s, and 0.254 m/s) and static bed height (0.1 m, 0.2 m, and 0.3 m) on the bubbles in the mineralized flow field region was investigated and evaluated for the formation of bubbles by shear in laboratory and semi-industrial experiments. The results show that the increase in filling bed height has a very obvious strengthening effect on the reduction of bubble diameter, and after the filling bed height reaches a certain value, the filling bed height will weaken the effect of apparent gas velocity on bubble diameter. The apparent gas velocity has different influencing effects on bubble diameter, and under conditions of low water velocity, the increase in the apparent gas velocity contributes to the reduction of bubble diameter. The conclusions of this study are expected to optimize the operating parameters of the flotation mineralization process and enrich the study of TFC, which can provide a reference for the design of future TFC studies.

Study on Deinking with Column Flotation System in Laboratory

Preliminary research on the deinking ability of column flotation

The Preliminary Research On Removing Stickies And Ash Particles In Recycled Pulp By Column Flotation

Parameters Analysis of Column Flotation Deinking Process

Study Of The Efficiency Of Flotation Deinking Using A New Type Of Floatation Cell

Development Of A Laboratory Floatation Cell And Its Deinking Efficiency

The Focuses in the Study of Using Flotation Column As Flotation Unit

The Methods of Air Bubble Size Measurement in Flotation Column for Recycled Pulp Deinking

Optimization of key link parameters and mechanism of the jet-stirring synergistic column flotation method

Evaluation of Flotation on the Removal of Stickies in MOW

Flotation Rate Modelling of Deinking Process in Flotation Column

Study of a Novel Fluidized Bed Flotation Column with Enhanced Bubble Dispersion

Evaluation of the Main Factors Influencing Floatation Deinking Efficiency

Design of Mixing Bubble Generator in Deinking Flotation Process

Flow of Gas-Liquid-solid System and Its Application in Packed Flotation Column

OPTIMIZATION OF FLOTATION PARAMETERS IN OLD BOOK PAPER DEINKING

Design and application of automatic monitoring and controlling system for flotation column

Effects of Aeration Device and Bubbles Distribution of Flotation Cell on the Deinking Efficiency

Investigate the Change of the Stickies Content during Deinking Process by Gel Permeation Chromatography-Evaporative Light Scattering Detector

The Influence of Flow Characteristics on Flotation Deinking Efficiency in a Deinking Cell

An investigation to deinking technology for MOW