Abstract:The report presented a method for generating a broad atomic oxygen (AO) beam with high flux‐density. The feasibility of the method was verified through theoretical simulations. The device successfully generated high flux‐density AO, which can facilitate the surface oxidation of materials. An AO‐assisted atomic layer deposition process was employed to produce Al2O3 films that exhibited better performance. Comprehensive Summary We detail the generation of a pulsed atomic oxygen (AO) broad beam with a high flux‐density via collision‐induced dissociation of O2 to support practical industrial exploitation of AOs, particularly for facilitating 2‐dimenstional oxidation/etching at a fast rate of one‐monolayer per second in an area ≥ 1000 cm2. This innovation fuses the following interdisciplinary concepts: (a) a high density of O+ can be produced in an electron‐cyclotron‐resonance (ECR) O2 plasma; (b) O+ can be extracted and accelerated with an aperture‐electrode in the plasma; (c) O+ with adequate kinetic energy can initiate a cascade of gas‐phase collisions in the presence of O2; (d) collision‐induced dissociation of O2 yields AOs with adequate kinetic energy which can cause additional collision‐induced dissociation of O2. Computational simulations of such collisions, with both ab initio molecular dynamics and direct simulation Monte Carlo methods, are used to guide the experimental generation of the proposed AO‐beam. We experimentally demonstrate the highest known AO mean flux‐density of about 1.5 × 1016 atoms·cm–2·s–1 in a broad‐beam, and use it to oxidatively modify a self‐assembled molecular layer of siloxane on a silicon wafer. In addition, we also demonstrate the growth of Al2O3 through an AO‐assisted atomic layer deposition process at room temperature.

A Ground-Based Radio Frequency Inductively Coupled Plasma Apparatus For Atomic Oxygen Simulation In Low Earth Orbit

Measurement of atomic oxygen densities using TALIF on a dielectric barrier discharge: Insights into the volume above a micro cavity plasma array

ECR Plasma Sources for Ionosphere Environment Simulator

Experimental and Simulation Investigation of Electrical and Plasma Parameters in a Low Pressure Inductively Coupled Argon Plasma

PISCES-RF: a liquid-cooled high-power steady-state helicon plasma device

Generation and Applications of a Broad Atomic Oxygen Beam with a High Flux‐Density via Collision‐Induced Dissociation of O2

Ground Vacuum Facility to Simulate Low Earth Orbit Plasma Environment

Effect of Additive Oxygen on the Interaction of a Helium Atmospheric Pressure Plasma Jet with a Dielectric Surface

Variable Radio-Frequency Cold Atmospheric He + O2 Discharges: from Electron-Heating Mechanism to Reactive Species Delivery

Generating a Sustained Oxygen-Stable Atomic Concentration in a High-Temperature Gas Effect Investigation

Quantitative Measurements of Ground State Atomic Oxygen in Atmospheric Pressure Surface Micro-Discharge Array

Simulation of Combined Environment of Atomic Oxygen and Ultraviolet and Development of Protection Technologies

Erosion effects of atomic oxygen for spacecraft materials in low earth orbit

Oxygen Concentration Measurement and Control of Lead-Bismuth Eutectic in a Small, Static Experimental Facility

Optical diagnostics of a low power—low gas flow rates atmospheric-pressure argon plasma created by a microwave plasma torch

Discharge characteristics of an atmospheric pressure radio-frequency plasma jet

A new 2D fluid-MC hybrid approach for simulating nonequilibrium atmospheric pressure plasmas: density distribution of atomic oxygen in radio-frequency plasma jets in He/O 2 mixtures

Experimental and Numerical Investigations of the Characteristics of Electron Density in O2/Ar Pulsed Planar-Coil-driven Inductively Coupled Plasmas

Measurement of controlled metastable oxygen atom concentration from nitric oxide AC glow discharge plasma

Ozone production by an He+O 2 radio-frequency atmospheric pressure plasma jet driven by tailored voltage waveforms

Electron temperature, ion density and energy influx measurements in a tubular plasma reactor for powder surface modification