Influence of Mercury Film Distortion on the Breakdown Voltage of the Sub-nanosecond Pulse Discharge Tube

WENG Ming,XU Wei-jun,XU Yang,YE Xian-feng

DOI: https://doi.org/10.3969/j.issn.1003-6520.2007.10.024

2007-01-01

Abstract:In order to study the effect of applied power voltage on the pulse amplitude of the sub-nanosecond discharge tube,two discharge tubes were used in our experiment,namely,the mercury wetted electrodes tube and the non-mercury tube.And the pulse generator and its parameter testing equipment were set up.It was obviously found that the pulse amplitude was increased with the increase of the power voltage in the case of adopting the mercury wetted electrodes tube.Meanwhile,the phenomenon was not in existence in the case of adopting the non-mercury tube.The mercury film distortion of the mercury wetted electrodes tube was observed by means of the microscope.And the dynamic breakdown voltage of the two tubes was measured by means of the oscillograph.The measurement results show that only the dynamic breakdown voltage of the mercury wetted electrodes tube was increased with the increase of the power voltage.So,we thought that the mercury film distortion was the main reason for the effect on breakdown voltage of the mercury wetted electrodes tube.An idea of mercury film distortion lagging behind the charged voltage was proposed to explain the experimental phenomenon.Then,using the mercury wetted electrodes tube,the pulse amplitude was controlled separately and continuously by use of changing the power voltage continuously.