Abstract:In this work, we employ pulse voltage to drive an atmospheric pressure plasma jet (APPJ) in Helium, and consider mainly the evolution of discharge inside tube. Specifically, the effects of rising edge on the discharge evolution are studied through the simulation and experiment. The spatiotemporal evolution of electron density, ionization source, electron temperature and excited helium atom are evaluated. Besides, the mechanism affecting the rise time is analyzed by the parameters such as discharge current, sheath thickness and surface charge density distribution. In the considered cases, the ionization wave propagates to the ground electrode and downstream of the active electrode in the dielectric tube. The plasma with faster rising edge has larger electron temperature, discharge current, electron density and electric field strength. With the change of voltage rising edge, there occur two discharge modes: hollow mode and solid mode in dielectric barrier discharge (DBD) area. When the rising edge is of nanosecond and sub microsecond, it develops into hollow mode, and changes into solid mode after the rising edge has continued to increase. Both discharge modes are essentially affected by the sheath thickness, the electric field distribution, and the surface charge density inside the tube. When the sheath thickness is less than 1.8 mm, the plasma usually propagates in hollow mode, and when the sheath thickness is equal to 1.8 mm, the radial propagation range of the plasma is limited and changes into solid propagation. In the DBD region, when the electric field is mainly axial component, the plasma propagates in the mode at the beginning of discharge; inside the ground electrode, owing to the fact that the applied electric field is deviated from the radial direction, and that the positive charge deposited on the tube wall forms a radial self-built electric field, the strong radial electric field formed by the superposition of the two fields causes the discharge to propagate in hollow mode.

Effects of Tube Diameter and Gas Flow Rate on the Discharge Dynamics Characteristics and Reactive Species of Nanosecond Pulsed Discharge Plasma in Contact With Water

The Influences of Shielding Gas and Quartz Tube on Discharge Properties and Reactive Species Productions of Nanosecond Pulsed Gas–liquid Discharge

The Effect of the Quartz Tube on the Appearance of Nanosecond Pulsed Discharge in Air

An Atmospheric Air Gas-Liquid Diffuse Discharge Excited by Bipolar Nanosecond Pulse in Quartz Container Used for Water Sterilization

Influence of Quartz Tube on the Nanosecond Pulsed Discharge in A Cone-To-Plane Air Gap

Optical and Application Study of Gas–liquid Discharge Excited by Bipolar Nanosecond Pulse in Atmospheric Air

An Integrated Approach to Understanding the Mass Transfer and Reaction Processes in a Pulsed High-Voltage Discharge Reactor

Repetitive pulsed gas–liquid discharge in different atmospheres: from discharge characteristics to plasma–liquid interactions

An Uniform DBD Plasma Excited by Bipolar Nanosecond Pulse Using Wire-Cylinder Electrode Configuration in Atmospheric Air.

Discharge Characteristics and Reactive Species Production of Unipolar and Bipolar Nanosecond Pulsed Gas–liquid Discharge Generated in Atmospheric N2

Nanosecond Pulsed Discharge in a Gas–liquid Mixture Produced by Hydrodynamic Cavitation Using Venturi Tube

Discharge modes and liquid interactions for plasma-bubble discharges

The Influence of Liquid Conductivity on Pulsed Discharge Generated by a Vertical Falling Liquid Electrode Device

The effects of gaseous bubble composition and gap distance on the characteristics of nanosecond discharges in distilled water

Atmospheric Pressure Gas–Liquid Diffuse Nanosecond Pulse Discharge Used for Sterilization in Sewage

Spatio-temporal evolution characteristics and pattern formation of a gas–liquid interfacial AC current argon discharge plasma with a deionized water electrode

Characteristics of a Nanosecond Pulsed Bubble Discharge in N-2/O-2 Atmospheres

Discharge Modes and Characteristics Optimization of Nanosecond Pulsed Discharge in Packed Bed Reactor

Modeling and experimental comparison of pulsed-DC driven low-pressure plasma discharge in a metal tube

Inactivation of Escherichia Coli Using Atmospheric Pressure Cold Plasma Jet with Thin Quartz Tubes

Effects of Pulse Voltage Rising Edge on Discharge Evolution of He Atmospheric Pressure Plasma Jet in Dielectric Tube