Abstract:Space charge formation in polymeric materials can cause some serious concern in real operation, because it has significant influence on the performance of polymers. For example, space charge in some insulating materials can severely distort the electric field, even lead to materials degradation. On the contrary, in the case of its applications, space charge stored in electrets can greatly improve their properties. It is therefore important to understand trapped charge distribution in materials as it is considered to be a novel indicator for effective evaluation of aging status and electric withstanding strength of insulating materials. In this paper, a model based on isothermal surface potential decay (ISPD) is proposed to study the distribution of trapped charges by considering the physical mechanism of the detrapping process. By measuring the ISPD characteristics of polymeric materials and fitting the data according to the assumption of shallow and deep traps, the distribution of trapped charges is obtained, which may be related to the change of aggregation structure of polymers. In order to verify the model, it is used to analyze different ISPD decay curves of polypropylene (PP) and low density polyethylene (LDPE), as well as the ISPD data of PP electrets with/without pressure expanding treatment. The results show that the proposed ISPD model is effective and convenient. Two peaks are observed on the curve of the trapped charge density versus the trap level. The obtained distribution of the trapped charges in polymers can reveal the different nature of electron/hole traps and the different transportation behavior of hole/electron carriers, i.e., the electron-type traps show an inter-chain character while the character of hole-type traps is intra-chain. In addition, the distribution of trapped charge is further related to aggregation structure of PP and LDPE, as well as PP electrets with/without pressure expanding treatment.

Analysis of Surface Trapping Parameters of Solid Insulation Dielectrics

Surface Trapping Parameters of Solid Dielectrics: Novel Measurement Method and Insulation Condition Characterization

Investigation on Surface Trapping and Electroluminescence Phenomena in Polymeric Insulation Materials

Analysis of trapping parameters in surface layer of solid insulating materials

Correlation of Traps Inside XLPE and Polypropylene with Space Charge Dynamics under Polarity Reversal Condition

Identification Of Electron And Hole Trap Based On Isothermal Surface Potential Decay Model

The Energy Distribution of Trapped Charges in Polymers Based on Isothermal Surface Potential Decay Model

Electroluminescence and Surface Trap Distribution in Polymeric Insulation

Characterizing Traps Distribution in LDPE and HDPE Through Isothermal Surface Potential Decay Method

Charge Dynamics: Linking Traps To Insulation Failure

Modified isothermal discharge current theory and its application in the determination of trap level distribution in polyimide films

Electroluminescence Andsurface TrapDistribution Inpolymeric Insulation

Measuring Energy Distribution of Surface Trap in Polymer Insulation by PEA Method

Correlation Between Trapping Parameters and Surface Insulation Strength of Solid Dielectric under Pulse Voltage in Vacuum

Surface Electroluminescence Phenomena Correlated with Trapping Parameters of Insulating Polymers

Investigation of Wide-Range Trap Energy Spectra of Typical Aerospace Polymer Dielectric Materials by Using Photo-Stimulated Discharge Method

Energy Distribution of Traps in Polyethersulfone Film Estimated Through Surface Potential Measurements

Trap Energy Distribution in Polymeric Insulating Materials Through Surface Potential Decay Method

Charge Traps Depended Space Charge Dynamics And Electrical Breakdown Characteristics Of Polymer Insulating Materials

Study on the Effect of Metal Particles on the Surface Trap Characteristics of Different Insulating Materials

Investigation of Charge Trapping and Detrapping Dynamics in LDPE, HDPE and XLPE