Abstract:Assembly construction is the main feature of industrialized bridges, and π-shaped section steel–concrete composites that are continuously rigid have been widely used in engineering fields in recent years; however, their dynamic responses and corresponding impact coefficients in positive and negative moment regions need to be further studied. First, considering the interface slip model, we established a finite element model for the π-shaped continuous region section of the steel–concrete composite on the Sutai Expressway Tongfu No. 3 viaduct. Second, the bridge deck unevenness parameters were generated by preparing a MATLAB program with random calculations and were added to the bridge deck as the excitation load along with the vehicle load. Such parameters are defined on the basis of considering the vertical degrees of freedom of the four wheels and of one vehicle rigid body. Finally, we analyzed the displacement or stress impact coefficients as the dynamic response index of the bridge by adjusting the vehicle travel speeds, vehicle weights, interface slip stiffness values, and deck unevenness values. The results show that the change in vehicle travel speed and the change in vehicle load weight have some influence on the change in the dynamic effect of the combined beam, but this change is not significant. Moreover, the unevenness and interface slip strength changes have a large effect on the dynamic effect of the combination beam, which can significantly change the impact coefficient of the combination beam bridge. The worse the unevenness of the bridge deck is, the lower the grade of interface slip for the steel–concrete composite bridges and the higher the impact coefficient. We calculated the recommended impact coefficient values of the steel–concrete composite bridge based on the specifications for various countries, and they range from 1.16 to 1.4; such values are similar to the finite element calculation results.

Evaluation of a Concrete Continuous Beam Bridge Using Load Test

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Load Test Analysis of a Long-Span Prestressed Nano-Concrete Highway Bridge

Load Test Analysis and Research on Long-Span Concrete Continuous Rigid Frame Bridge

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Dynamic evaluation for simply supported reinforced concrete beam with considering the influence of overload

Load Test of Long- span Curved Continuous Frame Bridge with High Pier

Research on evaluation method of bearing capacity of existing bridge based on static load test

Static and Dynamic Behavior of Continuous Box Girder Bridge and Its Experimental Investigation

Static and dynamic load test on concrete hollow-core slab bridge

Load Analysis on Asphalt Concrete Deck Pavement With Submodel Method

Bridge Load Testing for Identifying Live Load Distribution, Load Rating, Serviceability and Dynamic Response

Evaluation of bearing capacity of reinforced concrete box ribbed arch bridge based on dynamic load test

Seismic Analysis of Long Span Continuous Rigid-Frame Bridge with Thin-Walled High Piers

Nonlinear Finite Element Analysis for a Prestressed Continuous Rigid Frame Concrete Bridge

Performance Evaluation of a Long-Span Cable-Stayed Bridge Using Non-Destructive Field Loading Tests

Numerical Investigation on the Dynamic Performance of Steel–Concrete Composite Continuous Rigid Bridges Subjected to Moving Vehicles

Research on the fatigue performance of continuous beam bridges with vibration-mixed steel fiber-reinforced concrete

Damage Identification of Continuous Rigid Frame Concrete Bridge

DYNAMIC BEHAVIOR OF THREE-SPAN CONTINOUS STONE ARCH BRIDGE MEASURED BY FIBER BRAGG GRATING (FBG) SENSORS