Abstract:Aerodynamic shape optimization of turbomachinery blades taking the performance impact of geometric uncertainty into account is presented in the paper. A continuous adjoint method for the steady-state Euler equations is used to calculate the first order (FO) sensitivities of performance functions to the design parameters. For each performance function, all the sensitivities can be obtained by about two equivalent flow computations, regardless of the number of design parameters. The performance changes due to the geometric variations are evaluated on use of the second order (SO) sensitivities. A direct -adjoint method is used to calculate the FO and SO sensitivities of performance functions to the basis modes of geometric variations, which are extracted from a covariance function using principal component analysis method. Firstly, the sensitivities of the mass -averaged adiabatic efficiency and mass flow rate to the basis modes of geometric variations for a three-dimensional turbine blade are calculated. The validations of sensitivity -based performance impact are then illustrated. For the optimization maximizing the adiabatic efficiency with mass flow rate constrained, a series of shape functions are imposed on the turbine blade to perturb the aerodynamic shape. For each deformed blade with respect to each design parameter, the statistic mean values ofperformance changes are evaluated by using the method of moment and then contribute to the calculation of the corresponding FO sensitivity of performance functions. The design optimization without and with geometric uncertainty are finally presented. The results are compared in detail to demonstrate the effects of geometric variations to the optimization, especially to the statistical performance of the optimized blades. Through design optimization, the shock loss can be significantly reduced, compared with the original blade. The optimized blade is more robust in respect of geometric uncertainty.

Quantitative optimization method for rotor geometric parameters of liquid turbine flow sensor

Optimization Design of a Turbine Blade to Reduce Secondary Flow Loss Using a Viscous Adjoint Method

Multi-Objective Design Optimization of a Transonic Compressor Rotor Using an Adjoint Equation Method

Aerodynamic Shape Optimization Of A Turbine Blade Considering Geometric Uncertainty Using An Adjoint Method

Adjoint Aerodynamic Optimization of a Transonic Fan Rotor Blade with a Localized Two-Level Mesh Deformation Method

Flow Reconstructions and Aerodynamic Shape Optimization of Turbomachinery Blades by POD-based Hybrid Models

Multipoint Design Optimization of a Transonic Compressor Blade by Using an Adjoint Method

Optimization of a Turbine Flow Well Logging Tool Based on the Response Surface Method

Optimization Design of Aspect Ratio and Solidity of a Heavy-Duty Gas Turbine Transonic Compressor Rotor

Multi-objective optimization design of turbine stage with consideration of variables

Simulation Analysis and Experimental Study on Airfoil Optimization of Low-Velocity Turbine

Multi-component Optimization of Composite Pump-Jet Propulsor Based on Sensitivity Analysis

Optimization of a high through-flow design turbine using response surface method

Optimization of Rotor Tip Cavity Shapes for Mitigating Aerodynamic Tip Leakage Losses

Optimization of Impeller Parameters for Hydrodynamic Turbine Based on Multi-Objective Orthogonal Test Design

A cooled turbine blade design and optimization method considering the cooling structure influence

A topology optimization approach applied to laminar flow machine rotor design

Fluid Dynamic Efficiency Optimization of Steam Turbine Stages Considering Leakage Influences and Inter-stage Reciprocal Interferences

Design Optimization Of A Mixed Flow Waterjet Pump For Performance Improvement Involving Cavitation

A Cfd Approach to Fluid Dynamic Optimum Design of Steam Turbine Stages with Stator and Rotor Blades

Flow Investigation And Optimization Design Of A Radial Outflow Liquid Turbine Expander For Liquid Co2 Energy Storage System