Abstract:The transformation-assisted consolidation under pressure has been demonstrated to be a promising method to fabricate the nano or submicron polycrystalline ceramic materials. The high pressure suppresses the long-range diffusion of the atoms and, consequently, restrains the grain coarsening. The new phases produced at high pressure could show finer grains under the appropriate thermodynamic conditions, which are not subject to the grain size of the raw materials. Ceramic materials exhibit the existence of the transformations under certain thermodynamic conditions and the formation of new phases generally undergoes the nucleation and growth. In the present work, monoclinic microcrystal ZrO2 with average grain size of 2 µm and Y2O3 with average grain size of 50 nm were mixed in molar ratio of 97∶3. The preparation of the samples was carried out by sintering at 5.5 GPa and temperatures of 800–1700 °C using the high pressure cubic cell, and the sample characterization was performed via the X-ray diffraction, scanning electron microscope and transmission electron microscopy. It was found that the monoclinic and submicron tetragonal composite polycrystalline ZrO2 in bulk is obtained under high pressure and high temperature. The average grain size of tetragonal ZrO2 fabricated at 1200, 1400, 1600 and 1700 °C is (145±62) nm, (246±165) nm, (183±62) nm and (245±107) nm, respectively. The synthesis of the fine-grained polycrystalline materials by the transformation under high pressure can solve the problems of agglomeration, adsorption and grain coarsening caused by the nanopowders as the starting materials in the conventional approach, which would be an alternative route to fabricate the fine-grained polycrystalline materials with the enhanced performances.

Microstructures of ZrO2(3Y) ceramics after dynamic impact

Microstructures of ZrO<sub>2 </sub>(3Y) Ceramics after Dynamic Impact

Fabrication of Submicron Tetragonal Polycrystalline ZrO2 by the Transformation of Micro Monoclinic ZrO2 under High Pressure

Microstructure and Mechanical Properties of ZrO2-2 Mol% Y2O3 Ceramics

Microstructure and High Temperature Friction and Wear Properties of Nanostructured ZrO2(Y2O3)-Al2O3 Ceramics

Diffusionless Cubic-To-Tetragonal Phase-Transition And Microstructural Evolution In Sintered Zirconia Yttria Ceramics

Preparation, microstructure and mechanical properties of ZrB2–ZrO2 ceramics

Mechanical behavior of ZrO2 ceramics in the post-flash stage

Effects of Y2O3 on microstructure and mechanical properties of ZrB2–SiC ceramics

Microstructure and mechanical properties of ZrB2–SiC–ZrO2f ceramic

Microstructure, mechanical behavior and oxidation resistance of disorderly assembled ZrB2-based short fibrous monolithic ceramics

Deformed Microstructure Evolution in AM60B Mg Alloy under Hypervelocity Impact at a Velocity of 5 Km S−1

ANALYSIS OF THE MICROMORPHOLOGY AND STRUCTURE OF NANO Y-TZP MATERIALS SINTERED BY HOT_PRESSING

Effect of pressure loading cycle on spark plasma sintered ZrB 2-SiC-Yb 2O 3 ceramics

Study of Deformation Mechanisms in Flash-Sintered Yttria-Stabilized Zirconia by In-Situ Micromechanical Testing at Elevated Temperatures

Computer simulation of R-curve behaviour in ZrO2-Y2O3 ceramics

Effect of ZrO 2 contents on the mechanical and thermal shock properties of ZrO 2p(3Y)/BN-SiO 2 ceramics composite

Microstructure and Mechanical Properties of Zrb2-Based Ceramics

Martensitic transformation and microstructure of dual-phase Ti44Ni47Nb9 shape memory alloy after high-velocity impact

Modeling Microstructure Formation in Yttria-Stabilized Zirconia (YSZ) Droplet with High Impact Velocity in Supersonic Plasma Spray

Effects of amorphous phase and yttrium on flash sintering and microstructures of ZrO2–SiO2 ceramic nanocomposites