Abstract:Reactive magnetron sputtering deposition technique was used for formation of gadolinium doped ceria oxide (GDC) thin films 5- 10µm. Material characteristics and chemical compositions of GDC films were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and 3D profilometry. In order to optimize the deposition of GDC to obtain high electrochemical performance of the cells, the influence of film thickness is studied. The GDC thin films were deposited on porous NiO–GDC (nickel oxide–Gadolinium stabilized ceria), the pre-sintered anode green tape were coated with a GDC electrolyte film by reactive magnetron sputtering using PEM (Plasma Emission Monitoring). An Alcatel SCM650 sputtering chamber was used for synthesizing the dense GDC layers. A Ce-Gd metallic target (90-10% at) was powered by a pinnacle + pulsed current generator from Advanced Energy. The structural, microstructural and morphological features of the half-cells were determined by XRD, SEM and 3D profilometry as deposited and after different annealing treatments. The obtained half-cell, 28 mm of diameter, anode supported solid oxide fuel cell, the porous and density of Ni-GDC10 composite anodes have been elaborated by tape casting method. The chosen ceramic powders in suspension were prepared with the mass ratio of 65:35 for NiO to GDC10. The microstructural morphological /porosity/surface features of the half-cell were analyzed by Scanning Electron Microscopy (SEM), XRD and 3D profilometry before and after different annealing treatment. Pycnometry and porosimetry techniques were primarily used to determine pore size and pore volume by equation Washburn and Ideal gas law-method. Finally, the EIS (Electrochemical Impedance Spectroscopy) measurements were done on Ni-GDC10/GDC10 half-cells under 60 sccm nitrogen by the means of a Solartron SI 1260 impedance / gain analyser from 20 MHz to 0.1 Hz with 11 points per decade.

Preparation of Doped Ceria Anode/Electrolyte Double-Layer Structure by Tape Casting and Co-Sintering

Doped Ceria Electrolyte Powders Of High Sinterability Synthesized By Glycine-Nitrate Process

Preparation and Performance of IT-SOFC with Anode-Supported Thin GDC Electrolytes by Tape Casting Process

Synthesis and properties of gadolinium-doped ceria electrolyte powders

Microstructures, conductivities, and electrochemical properties of Ce0.9Gd0.1O2 and GDC–Ni anodes for low-temperature SOFCs

Co-Sintering of SDC / NiO-SDC Bi-Layers Prepared by Tape Casting

In Situ Densification of Gadolinium-Doped Ceria Interlayer by Infiltration Process in SOFC

Hierarchically oriented macroporous anode-supported solid oxide fuel cell with thin ceria electrolyte film.

Synthesis and Characterization of (gd, Y)-Doped Ceria Electrolytes for Solid Oxide Fuel Cell

Highly dense and ultrathin gadolinia-doped ceria interlayer for enhanced performance of large-area anode-supported solid oxide fuel cell

Construction and Scale-Up of High Performing SOFC with Enhanced GdxCe1−xO2−δ Barrier Layer Self-Crystallization and Defect-Free GDC-YSZ Interface

Densification of Ce0.9Gd0.1O2-δ Interlayer to Improve the Stability of La0.6Sr0.4Co0.2Fe0.8 O3-δ/Ce0.9Gd0.1O2-δ Interface and SOFC

Ni/SDC Materials for Solid Oxide Fuel Cell Anode Applications by the Glycine-Nitrate Method

Synthesis and Characterisation of Nanocrystalline CoxFe1-xGDC Powders as a Functional Anode Material for the Solid Oxide Fuel Cell

Fabrication, Sintering and Electrical Properties of Cobalt Oxide Doped Gd0.1Ce0.9O2−δ

Low Temperature Co-Sintering of Sr2Fe1.5Mo0.5O6−δ–Gd0.1Ce0.9O2−δ Anode-Supported Solid Oxide Fuel Cells with Li2O–Gd0.1Ce0.9O2−δ Electrolyte

Aerosol-Assisted Mocvd Growth of Gd2o3-Doped Ceo2 Thin Sofc Electrolyte Film on Anode Substrate

Nanostructured Lscf-GDC Cathodes Via a Sol–Gel Method for High Performance Solid Oxide Fuel Cells

A cathode-supported SOFC with thin Ce0.8Sm0.2O1.9 electrolyte prepared by a suspension spray

Properties of Gadolinium-doped Ceria (GDC) Films Deposited by Reactive Magnetron Sputtering Processes

Preparation and Properties of Gd3+ and Y3+ Co-Doped Ceria-Based Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells