Abstract:Polyacrylonitrile (PAN) has been investigated as an effective binder and coating material for silicon anodes in lithium ion batteries due to its inherent elasticity and the propensity to form conjugated structures. However, achieving a balance among the conductivity, binding strength and elasticity is a challenge faced by researchers. Herein, the structural and property evolution of PAN during calcination is systematically investigated to realize balanced conductivity and elasticity. Additionally, a hydrogen bonding network is established to address the issue of low binding strength by applying carboxymethyl cellulose (CMC) as the thickening agent for PAN. The as-prepared Si@cPAN@CMC electrode demonstrated a discharge capacity of 2358 mA h g-1 after 100 cycles at 1 A g-1, with an initial coulombic efficiency (ICE) of 91.0% and a capacity retention of 93.8%. Furthermore, the electrode exhibited a stable cycling life of nearly 700 cycles under a limited charge and discharge capacity of 1000 mA h g-1 at 1 A g-1, and the electrode with a mass loading of 3.0 mg cm-2 demonstrated a high areal capacity of 5.0 mA h cm-2 after 50 cycles at 0.5 A g-1. Therefore, this work opens a new avenue for designing a multifunctional coating layer for promising anodes of lithium-ion batteries. A coating with balanced conductivity, elasticity and binding strength is realized by establishing a hydrogen bonding network among SiNPs, modified-polyacrylonitrile (PAN), and binders, which can withstand a significant volume change.

The Pyrolytic Characteristic of Polyacrylonitrile and Its Application in Lithium Ion Batteries

Modified Polyacrylonitrile Cross-Linked with Carboxymethyl Cellulose Constructing a Hydrogen Bonding Network for High-Performance Silicon Anodes

Synthesis of Spherical Nano Tin Encapsulated Pyrolytic Polyacrylonitrile Composite Anode Material for Li-Ion Batteries

Oxygen-Functionalized Polyacrylonitrile Nanofibers with Enhanced Performance for Lithium-Ion Storage

Oxidative Pyrolysis of Si/Polyacrylonitrile Composites As an Unconventional Approach to Fabricate High Performance Lithium Ion Battery Negative Electrodes

A Polyacrylonitrile Shutdown Film for Prevention of Thermal Runaway in Lithium-Ion Cells

A Si–SnSb/pyrolytic PAN composite anode for lithium-ion batteries

Synthesis of nano Sb-encapsulated pyrolytic polyacrylonitrile composite for anode material in lithium secondary batteries

Comprehensive Understanding of High Polar Polyacrylonitrile as an Effective Binder for Li-Ion Battery Nano-Si Anodes

Effect of Pyrolytic Polyacrylonitrile on Electrochemical Performance of Si/graphite Composite Anode for Lithium-Ion Batteries

Study on Nano-Tin Encapsulated Polyacrylonitrile Composite Anode Materials

A novel pyrolyzed polyacrylonitrile-sulfur@MWCNT composite cathode material for high-rate rechargeable lithium/sulfur batteries

Incorporating Cyclized-Polyacrylonitrile with Li4Ti5O12 Nanosheet for High Performance Lithium Ion Battery Anode Material

Synthesis of Si-SnSb/pyrolytic polyacrylonitrile composite anode for reversible lithium storage

Synthesis of PAN/SnCl 2 composite as Li-ion battery anode material

Pre-oxidized and composite strategy greatly boosts performance of polyacrylonitrile/LLZO nanofibers for lithium-metal batteries

Carbon nanofibers derived from carbonization of electrospinning polyacrylonitrile (PAN) as high performance anode material for lithium ion batteries

High Molecular Weight Polyacrylonitrile Precursor for S@pPAN Composite Cathode Materials with High Specific Capacity for Rechargeable Lithium Batteries.

Conductive behaviour of lithium ions in polyacrylonitrile

Sulfurized Polyacrylonitrile Cathode Derived From Intermolecular Cross-Linked Polyacrylonitrile For A Rechargeable Lithium Battery

Composition regulation of polyacrylonitrile-based polymer electrolytes enabling dual-interfacially stable solid-state lithium batteries