Abstract:Silicone (PDMS) is equipped with photosensitive organosilica nanoparticles as fillers, which are attached to the polysiloxane network via hydrosilylation chemistry. Radiation of the composite with UV light induces fragmentation of the filler, which in turn causes a change in the mechanical properties. Implementing inorganic filler particles is a powerful method for improving the mechanical properties of polymer composites. The physical properties are determined by the interaction of the filler with the polymer. Thus, factors like the surface‐to‐volume ratio and surface modification are important. Besides the strategies of influencing these physical properties by a prior modification of the filler, this approach applies a post‐treatment of the composite. The present publication focuses on bringing stimuli‐responsive properties to a composite material by changing the chemical composition and structure of the filler particles. Instead of creating a responsive polymer, the concept is to use photo‐degradable organosilica nanoparticles that can change the mechanical properties of a polymer/filler composite after it has been prepared. After the synthesis of nitrobenzyl ether containing organosilica nanoparticles and the investigation of the photochemical processes, the preparation of the composites with silicones is described. Vinyl groups are attached to the surfaces to secure a homogeneous distribution of the filler particles inside the polymer matrix. After light‐induced decomposition, the mechanical properties are investigated. Other than expected, the material becomes stiffer, which is explained by an increase in the surface area of the silica particles, accompanied by the emergence of hydroxy groups that interact with the polysiloxane.

Study on Radiation-Curable Composition Modified by Nanosilica

Behavior of epoxy resin filled with nano-SiO<sub>2</sub> treated with a Eugenol epoxy silane

Effect Of Surface Modification Of Titanium Dioxide On The Uv-C Aging Behavior Of Silicone Rubber

Effect Of Titanium Dioxide On The Uv-C Ageing Behavior Of Silicone Rubber

The Effect of Silane Coupling Agent Containing Methacryloxy Group on UV-Curable Acrylate-Modified Polyurethane/SiO2 Hybrid Coatings

Synthesis and Characterization of Silica Nanocomposite in Situ Photopolymerization

Modification of photosensitive resin with fumed silica

Synthesis of UV-Cured Silicone Resin/Silica Nanocomposites from UV-Curable Polysilisiquioxane and Methacrylate-Functionalized Silica

Nano‐TiO<sub>2</sub>‐modified photosensitive resin for RP

Nano-TiODN2/DN-modified photosensitive resin for RP

Preparation and properties of UV curable SiO<inf>2</inf>/Epoxy resin composite

Preparation and properties of UV curable SiO<sub>2</sub>/Epoxy resin composite

Structure-property relationship of nano enhanced stereolithography resin for desktop SLA 3D printer

Effect of Nano SiO 2 Particles on the Morphology and Mechanical Properties of POSS Nanocomposite Dental Resins

Modification of SiO 2 Nanoparticle-Decorated TiO 2 Nanocomposites with Silane Coupling Agents for Enhanced Opacity in Blue Light-Curable Ink

Study on High Functional Modification of Silica and Properties of Filled SBR Compound

Photorheologic Silicone Composites with Adaptive Properties by Utilizing Light‐Degradable Organosilica Nanoparticles as Fillers

Effects of Vinyl Functionalized Silica Particles on Thermal and Mechanical Properties of Liquid Silicone Rubber Nanocomposites

The Effect of the Inorganic Nanomaterials on the UV-absorption, Rheological and Mechanical Properties of the Rapid Prototyping Epoxy-Based Composites

Radiation Induced Degradation of Silica Reinforced Silicone Foam: Experiments and Modeling

Optimization of Curing Behavior of Si3N4 UV Resin for Photopolymerization 3D Printing