Abstract:Hydrogen (H) atoms in the metallic crystalline lattice interact with the pre-existing dislocations and then remarkably affect the plastic deformation of metals. Thereby quantitatively characterizing the H-dislocation interaction is of great importance for understanding H-induced plasticity and failure. Most of the previous studies have focused on the long-range interaction between hydrogen and dislocation, but rarely considered the short-range interaction, especially the hydrogen effect on the dislocation core structure. Here, with the aid of the H-affected gamma-surface calculated from atomistic modeling, an atomistically-informed generalized Peierls-Nabarro model is employed to study the hydrogen effect on the core structure of dislocation, the recombination energy of the extended screw dislocation, and the Peierls stress in nickel. Our results show that, on the one hand, hydrogen can decrease the stable stacking fault energy, leading to the increase of the stacking fault width for both extended edge and screw dislocations. Consequently, the recombination energy of extended screw dislocation is increased, indicating that hydrogen can suppress the cross-slip of screw dislocation and facilitate the slip planarity observed frequently in experiments. On the other hand, hydrogen can increase the unstable stacking fault energy, implying that hydrogen can inhibit the nucleation of partial dislocations. Moreover, hydrogen in the dislocation core increases the Peierls stress and thus increases dislocation slip resistance. Finally, quantitative relations between the Peierls stress and hydrogen concentration are given. These results are of great significance for understanding the H-affected dislocation plasticity mechanisms, and can be used for quantifying the hydrogen effect on dislocation dynamics.

INDENTATION PLASTIC DEFORMATION AND EFFECT OF HYDROGEN ON DEFORMATION OF Ni-P AMORPHOUS COATINGS

Hydrogen-promoted Heterogeneous Plastic Strain and Associated Hardening Effect in Polycrystalline Nickel under Uniaxial Tension

Hydrogen Effect on the Deformation Evolution Process in Situ Detected by Nanoindentation Continuous Stiffness Measurement

Effect of hydrogen on nanomechanical properties of Inconel 625 studied using in-situ electrochemical nanoindentation technique

Hydrogen Effect On The Deformation Behavior Of Austenitic Stainless Steels Investigated By Nanoindentation

Distinct Evidence of Hydrogen-Enhanced Defect Formation on Pre-Strained Nickel Alloy 625 during In Situ Electrochemical Nanoindentation Test

The effect of plastic deformation on hydrogen diffusion in nickel Alloy 625

Interaction Between Plastic Deformation and Hydrogen Damage Behavior of 30crmnsini2a Steel

Effects of Hydrogen Charging and Deformation on Tensile Properties of a Multi-Component Alloy for Nuclear Applications

Deformation and Fracture of Nickel Phosphorus Coatings

Deformation Behavior and Indentation Size Effect in Amorphous and Crystallized Pd40Cu30Ni10P20 Alloy

Effects of Hydrogenation on Ambient Deformation Behaviors of Ti-45Al Alloy

Effect of stress level on hydrogen-induced nanohardness variations in CoCrNi medium-entropy alloy

Hydrogen-Enhanced Dislocation Activity And Vacancy Formation During Nanoindentation Of Nickel

Influence of hydrogenation on the mechanical properties of Pd nanoparticles

Atomistic Investigation of the Influence of Hydrogen on Mechanical Response During Nanoindentation in Pure Iron

Studying Hydrogen Effect on the Core Structure and Mobility of Dislocation in Nickel by Atomistically-Informed Generalized Peierls–Nabarro Model

Deformation Mechanisms of NiP/Ni Composite Coatings on Ductile Substrates

An In-Situ Electrochemical Nanoindentation (ECNI) Study on the Effect of Hydrogen on the Mechanical Properties of 316L Austenitic Stainless Steel

Hydrogen-enhanced homogeneous dislocation nucleation of nanoindentation in nickel

Effects of Hydrogen on the Nanomechanical Properties of a Bulk Metallic Glass During Nanoindentation