Effect of Deformed Prior Austenite Characteristics on Reverse Phase Transformation and Deformation Behavior of High-Strength Medium-Mn Steel
Ying Dong,Jingwen Zhang,Tao Liu,Mingxing Ma,Lei Zhu,Chengjun Zhu,Linxiu Du
DOI: https://doi.org/10.3390/ma17225618
IF: 3.4
2024-11-23
Materials
Abstract:In this study, microstructure evolution during prior austenite decomposition and reverse phase transformation processes was revealed in a high-strength medium-Mn steel. Furthermore, the relationship between deformed prior austenite characteristics and deformation behavior was studied. The results indicated that the recovery and recrystallization of the deformed prior austenite were significantly inhibited during hot rolling in the non-recrystallized zone, the grain size was obviously refined along the normal direction (ND), and that the strain hardening of prior austenite via hot deformation could increase the resistance of shear transformation, resulting in the preservation of high-density lattice defects in the quenched martensite matrix. Before the nucleation of intercritical austenite, the dislocation and grain boundary can provide fast diffusion paths for C and Mn, and the enrichment of C and Mn before intercritical austenite formation can reduce the critical temperature of ferrite/austenite transformation. The nucleated sites and driving force for intercritical austenite were strongly increased by rolling in the non-recrystallization region. The resistance of crack propagation was found to be enhanced by the sustained transformation-induced plasticity (TRIP) effect (via retained austenite with different stability) and for the laminated microstructure, the optimum properties were obtained as being a combination of yield strength of 748 MPa, tensile strength of 952 MPa, and total elongation of 26.2%.
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering