Abstract:This work demonstrated the combination of the self-assembly of a block copolymer with the well-established non-solvent induced phase separation process. Nanoporous films were obtained with well-ordered cylinder pores perpendicular to the film surfaces on top of a non-ordered bicontinous porous layer. Numerous parameters during the film formation process, including the concentration of casting solution, the solvent evaporation time, the temperature of precipitation bath, and the gate height of doctor blade, were systematically investigated to realize the effective control of surface morphology. Voronoi tessellation was first introduced to quantitatively describe the regularity of the surface pattern. It was found that the concentration of casting solution and the solvent evaporation time have synergetic influences on the porous structures. With the increase of concentration, the minimum evaporation time needed for a well-ordered porous surface decreases. If keep the concentration as a constant, the evolution of surface morphologies from non-ordered cylinder pores to ordered cylinder pores, and then to lamellar pores, was observed with the increase of evaporation time. Although lots of combinations of these two parameters can be utilized for the well-ordered structure formation, the mean pore size of the film surface didn't change significantly with the change of film preparation conditions. Besides, the decrease of the temperature of precipitation bath also helped to improve surface pattern regularity. Further study revealed that once the gate height of casting solution was decreased, the evaporation of solvent induced more significant change of casting solution concentration and the solvent composition, resulting in the disappearance of well-ordered cylinder pores. Two ways, including decreasing the solvent evaporation time and applying the solvent annealing process, were proven to be very effective to prepare thinner films with well-ordered nanoporous structures. The above results greatly broaden the operation window and provide possibilities to fabricate films suitable for different applications.

The evolution of morphology of ordered porous TiO 2 films fabricated from sol-gel method assisted ZnO nanorod template

Facile Fabrication of Porous ZnO by a Template Free Method

Conversion of large-scale oriented ZnO rod array into nanotube array under hydrothermal etching condition via one-step synthesis approach

Marangoni Effect Induced Macro Porous Surface Films Prepared Through a Facile Sol-Gel Route

Fabrication of TiO2 porous thin films using peg templates and chemistry of the process

Template-based Synthesis and Micro-structure Characterization of TiO2 Nano-array

Surface Patterned Porous Films by Convection-Assisted Dynamic Self-Assembly of Zeolite Nanoparticles.

Controllable Architecture of Mesoporous Double-Nanoshell SiO2/TiO2 Hollow Tube Based on Layer by Layer Method

Sequential Occurrence of ZnO Nanopaticles, Nanorods, and Nanotips During Hydrothermal Process in a Dilute Aqueous Solution

Anodization Fabrication of Highly Ordered Tio2 Nanotubes

Space-Confined seeding and growth of ordered arrays of TiO2 hierarchical nanostructures

A Novel Approach to Synthesizing Porous ZnO Films:Inorganic Chelating Sol-Gel Method

One Step Route to the Fabrication of Arrays of Tio2 Nanobowls Via A Complementary Block Copolymer Templating and Sol-Gel Process

Preparation and Morphology Control of Highly Ordered Nanoporous Films from Block Copolymers

Synthesis of TiO2 Porous Thin Films by Polyethylene Glycol Templating and Chemistry of the Process

Nanotubular ZrTiO 4 Prepared on Sputter Deposited Zr−Ti Films by Anodization

Biomimetic fabrication and tunable wetting properties of three-dimensional hierarchical ZnO structures by combining soft lithography templated with lotus leaf and hydrothermal treatments

Mechanistic insight into the synthesis and morphological evolution of yttrium oxide nanotubes

Ordered growth of metal oxides in patterned multi-angle microstructures

Self-assembly of Metal Oxide Nanoparticles into Hierarchically Patterned Porous Architectures Using Ionic Liquid/oil Emulsions.

Zinc Oxide Nanostructures: Morphology Derivation and Evolution