Abstract:The existing problems of the traction power-supply system (i.e., the existence of the neutral section and the power quality problems) limit the development of railways, especially high-speed railways, which are developing rapidly worldwide. The existence of the neutral section leads to the speed loss and traction loss as well as mechanical failures, all of which threaten the fast and safe operation of the train and the system. Meanwhile, the power quality problems (e.g., the negative sequence current, the reactive power, and the harmonic) can bring a series of problems that cannot be ignored on the three-phase grid side. In response, many researchers have proposed co-phase power-supply schemes to solve these two problems simultaneously. Given that the auto-transformer (AT) power-supply mode has become the main power-supply mode for the high-speed railway traction power-supply system, it has a bright future following the rapid development of the high-speed railway. In addition, there is no co-phase power-supply scheme designed for AT power-supply mode in the existing schemes. Therefore, the main contribution of this paper is to propose a specifically designed power-supply mode more suitable for the AT, as well as to establish the control systems for the rectifier side and the inverter side. In addition, for the proposed scheme, the operation principle is analyzed, the mathematical model is built, and the control system is created, and its functionality is verified by simulation, and its advantages are compared and summarized finally. The result proves that it can meet functional requirements. At the same time, compared with the existing co-phase power-supply scheme, it saves an auto-transformer in terms of topology, reduces the current stress by 10.9% in terms of the current stress of the switching device, and reduces the power loss by 0.25% in terms of the entire system power loss, which will result in a larger amount of electricity being saved. All of this makes it a more suitable co-phase power-supply scheme for the AT power-supply mode.

Scheme for Naturally Passing Neutral Sections of High Speed Railways

Analysis of Problems During Locomotive Passing Neutral Section and Novel Neutral Section Passing Scheme

Performance and Control Method of PMSMs Traction System in High Speed Train under Passing Neutral Section Condition

Research on novel uninterruptible phase-separation passing sheme in electrified railways

Research on Novel Railway Uninterruptible Flexible Connector with Series-Connected Transformers and Back-to-back Converter

Novel railway uninterruptible phase-separation passing and power quality compensation device for double-line traction network

A Novel Co-Phase Power-Supply System Based on Modular Multilevel Converter for High-Speed Railway AT Traction Power-Supply System

Study on Arc Suppression Method for Pantograph and Overhead Contact Line of High Speed Railway

Novel High Speed Railway Uninterruptible Flexible Connector Based on Modular Multilevel Converter Structure

Electromagnetic transient suppression for thyristor switch‐based auto‐passing neutral section system

Restriction on Secondary Arc Current on Ultra-high Voltage AC Double Circuit Transmission Lines on the Same Tower

Multi-Function Uninterrupted Phase-Separation Passing System and its Control Method

Research on railway novel uninterruptible phase-separation passing and power quality compensation device

Research of neutral grounding modes for 20kV distribution network

A Novel Power Electronic Autotransformer-Based Bipolar MVDC Electrified Railway System

Power supply arm protection scheme of high-speed railway based on wide-area current differential

A Compensation System for Cophase High-Speed Electric Railways by Reactive Power Generation of SHC&SAC

Transformerless power router used as load balancer and uninterruptible power supply for auto-passing neutral section

Analysis, design and control of a hybrid railway power conditioner considering power rating reduction

Mechanism of Low-Frequency Oscillation When Electric Multiple Units Pass Neutral Zone, and Suppression Method

A Pantograph Arcing Model for Electrified Railways with Different Speeds