Abstract:The existing problems of the traction power-supply system (i.e., the existence of the neutral section and the power quality problems) limit the development of railways, especially high-speed railways, which are developing rapidly worldwide. The existence of the neutral section leads to the speed loss and traction loss as well as mechanical failures, all of which threaten the fast and safe operation of the train and the system. Meanwhile, the power quality problems (e.g., the negative sequence current, the reactive power, and the harmonic) can bring a series of problems that cannot be ignored on the three-phase grid side. In response, many researchers have proposed co-phase power-supply schemes to solve these two problems simultaneously. Given that the auto-transformer (AT) power-supply mode has become the main power-supply mode for the high-speed railway traction power-supply system, it has a bright future following the rapid development of the high-speed railway. In addition, there is no co-phase power-supply scheme designed for AT power-supply mode in the existing schemes. Therefore, the main contribution of this paper is to propose a specifically designed power-supply mode more suitable for the AT, as well as to establish the control systems for the rectifier side and the inverter side. In addition, for the proposed scheme, the operation principle is analyzed, the mathematical model is built, and the control system is created, and its functionality is verified by simulation, and its advantages are compared and summarized finally. The result proves that it can meet functional requirements. At the same time, compared with the existing co-phase power-supply scheme, it saves an auto-transformer in terms of topology, reduces the current stress by 10.9% in terms of the current stress of the switching device, and reduces the power loss by 0.25% in terms of the entire system power loss, which will result in a larger amount of electricity being saved. All of this makes it a more suitable co-phase power-supply scheme for the AT power-supply mode.

Transformerless power router used as load balancer and uninterruptible power supply for auto-passing neutral section

A Novel Neutral Current Control Strategy for the Three-Phase Four-Wire Boost PFC Converter

Power Decoupling Three-Port Converter with Integrated Transformer

A Three-Stage Energy Router With Modified Transformer And Improved Voltage Balance Strategy

A new power circuit topology for energy router

Research on Novel Railway Uninterruptible Flexible Connector with Series-Connected Transformers and Back-to-back Converter

A Hybrid ZVS Full-Bridge Converter with Transformer Winding Series-Parallel Auto Regulated Current Doubler Rectifier

A Novel Power Router with General AC and DC Port

Synthetical Control Technology of Electric Energy Router Based on Energy Balance Relationship

Novel High Speed Railway Uninterruptible Flexible Connector Based on Modular Multilevel Converter Structure

Design and Implementation of AC-DC Hybrid Multi-Port Energy Router for Power Distribution Networks

Power Flow Optimization and Control Strategy for Energy Router in Dual Mode Traction Power Supply System

A Novel Circuit of Power Converters Applied to EV Wireless Charging System

Virtual Neutral Point Selection for Three-Leg Railway Power Quality Conditioner

Scenario Simulated Experimental Platform of Ac-Dc Hybrid Multi-Port Energy Router for Power Distribution Networks

Power Flow Calculation of Distribution Network with Multiple Energy Routers

Research on novel uninterruptible phase-separation passing sheme in electrified railways

A Novel Co-Phase Power-Supply System Based on Modular Multilevel Converter for High-Speed Railway AT Traction Power-Supply System

A Multiple-AC-Ports Power Electronic Transformer

An energy router based on multi-winding high-frequency transformer

A New Topology of Energy Router with Multiple Hvac Ports for Power Distribution Networks