Abstract:Curved contour on large thin-walled skin is difficult to be machined since severe deformations usually occur on real skin. It is critical to determine the real geometry of the deformed contour. Under the assumption that only the normal deformation of the large thin-walled skin occurs and the shear deformation is ignored, a novel isometric mapping based adaptive machining method is developed. While straightness distance or local angle is preserved in traditional surface mapping methods, arc-length is preserved in proposed isometric mapping to improve the contour cutting accuracy. The proposed method consists of three steps. (1) The real geometry of the deformed surface is obtained by using a laser scanner based on-machine measurement (OMM) system. The measured point cloud is then transformed into triangular mesh to represent the deformed surface. Some points on the nominal surface are sampled based on uniform sampling strategy, and the corresponding sampling points in the deformed surface are also allocated. (2) Isometric mapping between the two groups of points is constructed. Matching accuracy between nominal surface and real surface is defined based on the deviation of the geodesic distances of the two groups of points. A surface matching optimization model is developed to adjust the mapping point location in the triangular mesh and achieve a minimum surface mismatch error. (3) The toolpath is adaptively adjusted to compensate the deformation error based on the isometric surface mapping results. Both simulation and machining experiments are conducted to demonstrate the feasibility and validity of the proposed method. The experiment results show that accuracy of the machined curved contour on the deformed skin has been significantly improved.

Design of Curved Surface Manufacture System with Five DOF and Its CAM

An accurate surface error optimization for five-axis machining of freeform surfaces

Five-axis Tool Path Generation in CNC Machining of T-spline Surfaces

Simulation Software Development for Curved Surface Machining by WEDM Based on Pro/ENGINEER

Research On Feedrate Control Strategy For Sculptured Surfaces Machining With Five-Axis Cnc

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

Research on Free-form Surface CAD/CAM/CNC Integrated System

A NEW TOOL PATH PLANNING MODEL OF COMPUTER AIDED MANUFACTURING (CAM) FOR FREEFORM SURFACES

CAD/CAM software for manufacturing 3-D curved surfaces using WEDM

Simulation of Cutting Space Surfaces During Five-Axes WEDM

Axis path planning of five-axis surface machining by optimizing differential vector of the axis movement considering tool posture limits

Adaptive Machining for Curved Contour on Deformed Large Skin Based on On-Machine Measurement and Isometric Mapping

7-Axis Synchronization-Integrated On-the-fly Laser Texturing System of Freeform Surface: Design and Development

Tool Deflection Error Compensation in Five-Axis Ball-End Milling of Sculptured Surface

Tool orientation planning for five-axis CNC machining of open free-form surfaces

Machining with a Precision Five-Axis Machine Tools Created by Combining a Horizontal Parallel Three-Axis Motion Platform and a Three-Axis Machine Tools

Kinematic Planning and In-Situ Measurement of Seven-Axis Five-Linkage Grinding and Polishing Machine Tool for Complex Curved Surface

Research on Configuration Design Optimization and Trajectory Planning of Manipulators for Precision Machining and Inspection of Large-Curvature and Large-Area Curved Surfaces

Design and development of a five-axis machine tool with high accuracy, stiffness and efficiency for aero-engine casing manufacturing