Abstract:Long-range surface plasmon resonance (LRSPR), generated from a coupled plasmon polariton in a thin metal slab sandwiched by two dielectrics, has attracted more and more attention due to its merits, such as longer propagation and deeper penetration than conventional single-interface surface plasmon resonance. Many useful applications related to light–medium interaction have been demonstrated based on the LRSPR effect, especially in the sensing area. Here, we propose and demonstrate an LRSPR-based refractive index sensor by using a SiO2-Au-TiO2 heterostructure, in which a D-shaped honeycomb-microstructure optical fiber (MOF) is designed as the silica substrate and then deposited with a gold film and thin-layer titanium dioxide (TiO2). By using the full-vector finite-element method (FEM), this heterostructure is numerically investigated and demonstrated to excite LRSPR without a buffer layer, which is usually necessary in previous LRSPR devices. Through comprehensive discussion about the influence of structural parameters on the resonant wavelength, the excitation of the LRSPR in the proposed heterostructure is revealed to be highly related to the effective refractive index of MOF’s fundamental core mode, which is mainly determined by the MOF’s pitch, the thicknesses of the silica web and the planar-layer silica. Moreover, the thin-layer TiO2 plays an important role in significantly enhancing the resonance and the sensitivity to analyte’s refractive index as well, when it is coated on the top of the Au film rather than between the metal and waveguide. Finally, the proposed LRSPR sensor based on SiO2-Au-TiO2 heterostructure shows an ultra-high wavelength sensitivity of 20,100 nm/RIU and the corresponding minimum resolution is as low as 4.98×10−7 RIU. Thus, the proposed LRSPR device offers considerable potential for sensing applications in biomedical and biochemical areas.

Simulation of Refractive Index Sensor Based on Long-range Surface Plasmon Polariton with Buffered Asymmetric Structure

A Symmetrical Optical Waveguide Based Surface Plasmon Resonance Biosensing System

Multichannel, Line-Monitoring Sensing Approach Based on Long-Range Surface Plasmons

All-Optical Sensor Based on Surface Plasmon Polaritons in Multi-Layers Metal-Dielectric Structure

Refractive Index Sensors Based on Ag-metalized Nanolayer in Microstructured Optical Fibers

A Sensitive Bi-Reflection Surface Plasmon Resonance Waveguide Sensor Based On Sion

Study and Numerical Simulation of a Surface Plasmon Resonance Sensor Using Bi-Beam Differential Measurement Approach

A Refractive Index Sensor Based on PCF With Ultra-Wide Detection Range

Design of a Surface Plasmon Resonance Sensor Based on Grating Connection

Axial Spatial Refractive Index Distribution of Surface Plasmon Resonance Sensor Based on Multi-Wavelength Angular Interrogation Structure

A High-Sensitivity Refractive-Index Sensor Based on Plasmonic Waveguides Asymmetrically Coupled with A Nanodisk Resonator

Sensitivity Enhanced Refractive Index Fiber Sensor Based on Long-Range Surface Plasmon Resonance in SiO2-Au-TiO2 Heterostructure

A Symmetric MIM Waveguide Structure of a High-Sensitivity Refractive Index Sensor

High-Property Refractive Index and Bio-Sensing Dual-Purpose Sensor Based on SPPs

Long-range Surface Plasmon Resonance Sensor Based on Side-Polished D-shaped Hexagonal Structure Photonic Crystal Fiber with the Buffer Layer of Magnesium Fluoride

Surface Plasmon Resonance for Sensing

Symmetrical Long Range Surface Plasmon Resonance Sensing System

Ultracompact Refractive Index Sensor Based on Surface-Plasmon-Polariton Interference

A High Sensitivity Refractive Index Sensor Based on Microstructure Fiber with Simple Structure and SPR Effect

Surface Plasmon Resonance Sensor Based on Spectral Interferometry: Numerical Analysis

Long-range Surface Plasmon Resonance Sensor Based on Dielectric/silver Coated Hollow Fiber with Enhanced Figure of Merit