Abstract:Membrane drying and water flooding are important problems concerned Proton Exchange Membrane Fuel Cell (PEMFC) system's performance and reliability. In order to monitor the PEMFC stack's drying and flooding, a cell voltage monitor system (CVMS) was attached on PEMFC system, which in return degraded the system's stability and increased the system's complexity. This paper's purpose is to abandon the CVMS and diagnose PEMFC stack's drying with in-situ ohmic resistance test and diagnose PEMFC's flooding with anode pressure drop test. Firstly, the ohmic resistance were tested under variable operating conditions with current interruption method. The PEMFC's membrane drying processes were studied through the experimental method, the change rules of operating voltage, ohmic resistance and anode pressure drop had been obtained. The in-situ ohmic resistance test plan had been discussed to judge if the PEMFC is working under the dryness condition. Secondly, the flooding experiments had been developed on the same PEMFC stack. The experiment result revealed that, the anode pressure drop data maintained good linear relations with the operational parameter in unflooding situations; the anode pressure drop obviously increased when flooding occurred. The operational parameters influenced the PEMFC's flooding: increasing the cathode inlet relative humidity, elevating the operating temperature, enhancing the operating current, reducing the cathode inlet stoichiometric ratio, the PEMFC would flood easily. But the anode inlet stoichiometric ratio and operating pressure did not have the obvious influence to PEMFC's flooding. The PEMFC's flooding problem would be solved effectively by pulse exhaust method. It would improve the PEMFC's performance and increase its efficiency to choose the proper pulse opportunity and pulse width. Through this study, the PEMFC's ohmic resistance test for membrane drying diagnosis and anode pressure drop test for PEMFC flooding diagnosis system had been established, an in-situ diagnosis system for vehicle PEMFC water management system have been raised. The work in this paper basically dealt with the main problems in the PEMFC water management system for vehicular application. It is valuable for optimizing PEMFC system and improving PEMFC's efficiency.

Experiment on Ohmic Resistance of Proton Exchange Membrane Fuel Cell

Electrochemical Performance Modeling of A Proton Exchange Membrane Electrolyzer Cell for Hydrogen Energy

Effect of cathode relative humidity on membrane water content and performance of PEMFC

Numerical Modeling of Liquid Water Transport Inside and Across Membrane in PEM Fuel Cells

Reaction Gas Pressure, Temperature, and Membrane Water Content Modulate Electrochemical Process of a PEMFC: A Simulation Study

The Performance Improvement of Membrane and Electrode Assembly in Open-Cathode Proton Exchange Membrane Fuel Cell

Pt/C Modified Proton Exchange Membrane for Improved Fuel Cell Performance

An Experimental Study on the Performance of Automotive PEMFC Under Typical Conditions

Effects of Dynamic Changes in Inlet Temperature on Proton Exchange Membrane Fuel Cell

Experimental Investigation and Comprehensive Analysis of Performance and Membrane Electrode Assembly Parameters for Proton Exchange Membrane Fuel Cell at High Operating Temperature

Influence of Operating and Electrochemical Parameters on PEMFC Performance: A Simulation Study

Numerical and Experimental Investigation of the Asymmetric Humidification and Dynamic Temperature in Proton Exchange Membrane Fuel Cell

Mechanistic investigation on the voltage collapse of polymer electrolyte membrane fuel cell under high-temperature and low-humidity conditions

Effects of interfacial contact under different operating conditions in proton exchange membrane water electrolysis

Experimentally and Numerically Investigating Cell Performance and Localized Characteristics for a High-Temperature Proton Exchange Membrane Fuel Cell

Numerical simulation and experimental study on the effect of cathode relative humidity on the performance of the PEMFC with dead-ended anode

Analyze the Effects of Flow Mode and Humidity on PEMFC Performance by Equivalent Membrane Conductivity

Sensitivity analysis of proton exchange membrane fuel cell performance to operating parameters and its applicability assessment under different conditions

Study on the diagnosis of vehicle PEM Fuel Cell Membrane drying and water flooding

Experimental Study of Proton Exchange Membrane Fuel Cells Using Nafion 212 and Nafion 211 for Portable Application at Ambient Pressure and Temperature Conditions

Uncoupling Characteristics Of Temperature And Relative Humidity Distribution In A Commercial-Size Polymer Electrolyte Membrane Fuel Cell