Abstract:The study of microstructural evolution in ternary Sn-Bi-Ag solder alloys is critical due to its direct impact on the mechanical properties of these low-temperature solder materials. This research compares the solidification and deformation behaviors of two such alloys, Sn-10Bi-1Ag and Sn-57Bi-1Ag, to shed light on the influences of bismuth (Bi) content variations. Experimental results indicate that increasing Bi content alters the solidification process and the degree of undercooling. In the Sn-10Bi-1Ag alloy, the eutectic reaction produces plate-like Ag3Sn with a predominant with {1010}hcp facet, considering Ag3Sn as a pseudo-hexagonal structure. Conversely, in the Sn-57Bi-1Ag alloy, Ag3Sn nucleates as the primary phase, exhibiting blocky or extensively branched morphologies, enclosed by various facets including {0001}hcp and {1010}hcp. Additionally, two distinct Bi particle sizes were identified in the Sn-10Bi-1Ag alloy: eutectic lamellar Bi (-200 nm) and Bi precipitates (-15 nm), when cooled at 10 degrees C/min, in comparison to typical lamellar beta-Sn/Bi eutectics in Sn-57Bi-1Ag. In-situ tensile test revealed that the Sn-10Bi-1Ag demonstrates superior strength and reduced ductility. This is attributed to the reinforcement provided by the smaller-sized Bi particles and the eutectic Ag3Sn structures. In contrast, for the Sn-57Bi-1Ag, the primary Ag3Sn phase tends to fracture during deformation, and the deformation mechanism is predominantly controlled by grain boundary and phase boundary sliding. This study elucidates the significance of Bi precipitates and Ag3Sn in Sn-Bi-Ag solder, providing valuable insights for the alloy design of future low-temperature solders.

Microstructure and Physical Properties of Sn - 20Bi-X Lead-Free Solders

Influence of Microelements on Properties of Sn -20Bi Solder

Effect of Microelements on Sn-20Bi Solder

Coupled effect of Ag and In addition on the microstructure and mechanical properties of Sn–Bi lead-free solder alloy

Microstructure Evolution and Deformation Behaviour of Sn-Xbi-1ag Solder Alloys: Influences of Bi Content

Effect of Alloy Element on Microstructure and Impact Toughness of Sn-57Bi Lead-free Solders

Influence of Bi on Microstructure and Properties of Sn-Zn Lead-free Solder

Microstructure, Thermal and Wetting Properties of Sn-Bi-Zn Lead-Free Solder

Effects of Sb Addition on the Microstructure and Mechanical Performance of Sn58Bi Based Alloys and the Solder Joints

Microstructures and Properties of Sn-Zn-Bi Solder Alloys

Composition design and mechanical properties of low-temperature Sn-Bi-In-(Ag) solders with low Bi content

Effects of Cu, Bi, and in on Microstructure and Tensile Properties of Sn-Ag-X(Cu, Bi, In) Solders

Effect of Ag Element on Microstructure and Mechanical Properties of Sn-Bi-xAg Solders Designed by Cluster-Plus-glue-atom Model

Effect of Cu, In, Bi, S on the Properties of Sn/Ag Based Lead-free Solder

The Influence of Ag on the Microstructure, Thermal Properties and Mechanical Behavior of Sn–25Sb-xAg High Temperature Lead-Free Solder

The Microstructure, Thermal, and Mechanical Properties of Sn-3.0Ag-0.5Cu-xSb High-Temperature Lead-Free Solder

Effects of Ga addition on the microstructure and mechanical performance of Sn-58Bi based alloys and the solder joints

Effect of Ag Content on Properties of SnAgCuX Lead-Free Solder

Effect of Sb content on properties of Sn - Bi solders

Microstructure and Mechanical Properties of Sn-xGa Alloys and Solder Joints

Effect of Solidification Mode on Microstructure and Properties of Sn-Bi Solders