Abstract:Sn-Bi solder with different Bi content can realize a low-to-medium-to-high soldering process. To obtain the effect of Bi content in Sn-Bi solder on the microstructure of solder, interfacial behaviors in solder joints with Cu and the joints strength, five Sn-Bi solders including Sn-5Bi and Sn-15Bi solid solution, Sn-30Bi and Sn-45Bi hypoeutectic and Sn-58Bi eutectic were selected in this work. The microstructure, interfacial reaction under soldering and subsequent aging and the shear properties of Sn-Bi solder joints were studied. Bi content in Sn-Bi solder had an obvious effect on the microstructure and the distribution of Bi phases. Solid solution Sn-Bi solder was composed of the beta-Sn phases embedded with fine Bi particles, while hypoeutectic Sn-Bi solder was composed of the primary beta-Sn phases and Sn-Bi eutectic structure from networked Sn and Bi phases, and eutectic Sn-Bi solder was mainly composed of a eutectic structure from short striped Sn and Bi phases. During soldering with Cu, the increase on Bi content in Sn-Bi solder slightly increased the interfacial Cu6Sn5 intermetallic compound (IMC) thickness, gradually flattened the IMC morphology, and promoted the accumulation of more Bi atoms to interfacial Cu6Sn5 IMC. During the subsequent aging, the growth rate of the IMC layer at the interface of Sn-Bi solder/Cu rapidly increased from solid solution Sn-Bi solder to hypoeutectic Sn-Bi solder, and then slightly decreased for Sn-58Bi solder joints. The accumulation of Bi atoms at the interface promoted the rapid growth of interfacial Cu6Sn5 IMC layer in hypoeutectic or eutectic Sn-Bi solder through blocking the formation of Cu6Sn5 in solder matrix and the transition from Cu6Sn5 to Cu3Sn. Ball shear tests on Sn-Bi as-soldered joints showed that the increase of Bi content in Sn-Bi deteriorated the shear strength of solder joints. The addition of Bi into Sn solder was also inclined to produce brittle morphology with interfacial fracture, which suggests that the addition of Bi increased the shear resistance strength of Sn-Bi solder.

Influence of Microelements on Properties of Sn -20Bi Solder

Effect of Microelements on Sn-20Bi Solder

Microstructure and Physical Properties of Sn - 20Bi-X Lead-Free Solders

Influence of Bi on Microstructure and Properties of Sn-Zn Lead-free Solder

Coupled effect of Ag and In addition on the microstructure and mechanical properties of Sn–Bi lead-free solder alloy

Effect of Cu, In, Bi, S on the Properties of Sn/Ag Based Lead-free Solder

Effect of in on Microstructure, Thermodynamic Characteristic and Mechanical Properties of Sn–Bi Based Lead-Free Solder

Effects of Sb Addition on the Microstructure and Mechanical Performance of Sn58Bi Based Alloys and the Solder Joints

Microstructure Evolution and Deformation Behaviour of Sn-Xbi-1ag Solder Alloys: Influences of Bi Content

The Influence of Ag on the Microstructure, Thermal Properties and Mechanical Behavior of Sn–25Sb-xAg High Temperature Lead-Free Solder

Composition design and mechanical properties of low-temperature Sn-Bi-In-(Ag) solders with low Bi content

Effects of Cu, Bi, and in on Microstructure and Tensile Properties of Sn-Ag-X(Cu, Bi, In) Solders

Effect of Alloy Element on Microstructure and Impact Toughness of Sn-57Bi Lead-free Solders

Effects of Ga addition on the microstructure and mechanical performance of Sn-58Bi based alloys and the solder joints

Effect of Sb content on properties of Sn - Bi solders

The Microstructure, Thermal, and Mechanical Properties of Sn-3.0Ag-0.5Cu-xSb High-Temperature Lead-Free Solder

Microstructures and Properties of Sn-Zn-Bi Solder Alloys

Significant Enhancement of Comprehensive Properties of SnBi Solder Through the Addition of Cu@Ag Core-Shell Particles

Effects of Bismuth on Growth of Intermetallic Compounds in Sn-Ag-Cupb-Free Solder Joints

Interfacial Reaction And Mechanical Properties Of Sn-Bi Solder Joints

Effect of Bi Content on Properties of SnXCuNi Solder Alloy and Interfacial Microstructure Between Solder and Cu Substrate