Abstract:This paper establishes a theoretical model of defective pile-beam system. The soil around the pile is modeled as a continuous three-dimensional model. The pile is modeled as a Rayleigh-Love rod model that considers its transversal inertia effect. The defect of the pile is simulated by a pile segment with a different radius from the normal pile segment. The impedance function recursion method, along with RSPT and AIFTM, is utilized to derive the impedance of the pile top. The beam is modeled as a Timoshenko beam and the transient excitation is applied at the connection between the pile and the beam. Analytical solution for the dynamic response of the system in the frequency domain is derived, and the discrete Fourier transform is used to obtain a semi-analytical solution for the time-domain response. The velocity at the connection between the pile and beam and the pile body can be measured to assess defects. The semi-analytical solution presented in this paper was validated through comparison with FEM results. Reflection from necked segment is more pronounced at pile-beam connection than at pile body. Both velocity curves at these two points should be measured when beam cross-section height is large to determine pile integrity. The peak value and arrival time of characteristic waves are influenced by burial depth, necking section parameters, beam cross-section height, cantilever length, and soil parameters. These findings can provide guidance for the application of low strain integrity testing in pile-beam systems.

3-D Finite Element Analysis of Parallel Seismic Testing for Integrity Evaluation of In-Service Piles

3d Finite Element Analysis Of Parallel Seismic Tests For Integrity Of Piles Of Existing Structures

STUDY ON PILE LONGITUDINAL VIBRATION CONSIDERING EFFECT OF UNDERGROUND WATER LEVEL

Studies on Parallel Seismic Testing for Integrity of Cemented Soil Columns

DEM Study of the Stress Fields Around the Closed-Ended Displacement Pile Driven in Sand

3D Finite Element Analysis of Parallel Seismic Method for Integrity of Cemented Soil Columns

Model tests on characteristics of ocean and offshore elevated piles with large lateral deflection

Multipoint Traveling Wave Decomposition Method and Its Application in Extended Pile Shaft Integrity Test

Theoretical Basis and Numerical Simulation of Parallel Seismic Test for Existing Piles Using Flexural Wave

Dynamic Response of a Defect Pile in Layered Soil Subjected to Longitudinal Vibration in Parallel Seismic Integrity Testing

A 3D analytical model for distributed low strain test and parallel seismic test of pipe piles

Comparison of Parallel Seismic and Reflected Wave Tests for Piles

Dynamic Impedances and Free-Field Vibration Analysis of Pile Groups in Saturated Ground

Dynamic Soil Reactions Around a Beam-on-Multiple-Piles Structure and Their Application in the Parallel Seismic Integrity Test

Approach for defective floating pile embedded in layered saturated soils and application in pile integrity test

PS Wave Based Parallel Seismic Test for Pile Length Assessment

Dynamic Soil Reactions Around Pile-Fictitious Soil Pile Coupled Model and Its Application in Parallel Seismic Method

Semi-analytical study of defective pile-beam systems under transient excitation: Implications for low-strain testing

Selection of Pile Testing Signals for Parallel Seismic Test

Analytical Model for Laterally Loaded Soil-Extended Pile Shaft Applied to Verifying the Applicability of Lateral PS Method

3D Finite Element Analysis of Reflected Waves in Concrete Pipe Pile with Defects