Abstract:In this paper, we first study the voltage and electric field distribution characteristics under the basic lightning impulse level (BIL) of 2400 kV by finite element method (FEM) calculation which are affected by the internal shielding structure of the gas-insulated bushing for the 1100-kV gas-insulated substation (GIS). On this basis, four parameters of the shielding structure are determined to be the decision variables in the optimization process. Four electric field objective functions and four potential objective functions are also proposed. Using a multiobjective optimization method, we then construct an evaluation function with the eight objective functions mentioned above, which are used to evaluate the electric field and potential distribution synthetically. Furthermore, a combination of FEM and the evolution strategy is used to construct the stochastic optimization objective function with the multiobjective evaluation function. The electric field and potential distribution of the gas-insulated bushing are greatly improved after optimization, and the electric field strength at key spots is effectively reduced. The insulation system of gas-insulated bushing for 1100-kV GIS designed by this method has passed type tests and worked well nearly 3 years. So, this optimization provides a constructive method and useful basis for the design of gas-insulated bushings for 1100-kV GIS and other electrical equipment. (c) 2013 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.

Potential Distribution Analysis And Improvement Of 1000 Kv Gas Insulted Switch Metal Oxide Arrester

Analysis and Improvement of Potential Distribution of 1000-Kv Ultra-High-Voltage Metal–Oxide Arrester

Analysis and improvement of potential distribution of 1000-kV metal oxide arrester by combining 3D FEM and circuit analysis method

Influence of Grading Ring on Potential Distribution of 1000 Kv Gas Insulted Switchgear Metal Oxide Arrester

Study on the potential distribution of 750 kV metal oxide surge arrester

Voltage-Sharing Performance Of Moa For 1000kv Uhv Gis

Finite Element Calculation and Experiment of Potential Distribution for a 500 kV Porcelain Zinc Oxide Arrester

Electric Field Analysis of 500 Kv Tank Type Metal Oxide Surge Arresters

Calculation of Potential Distribution and Design of the Grading Rings for a New Type of Porcelain 500 kV Metal Oxide Arresters

Research on Iterative Method for The Potential Distribution Calculation of Arrester

Calculation of the Potential Distribution of High Voltage Metal Oxide Arrester by Using an Improved Semi-Analytic Finite Element Method

Electric field calculation and shield optimization for 1000kV GIS bushing

Electric field numerical analysis and structure optimization of grounding switch in GIS based on finite element analysis

Study on the Protective Effect of MOA on Lightning Intruding Waves of 750kv Substation

Optimization On The Internal Insulation System Of Gas-Insulated Bushing For 1100-Kv Gis Based On Multiobjective Optimization Method

Research On The Voltage-Sharing Performance Of 500kv Gapless Moa On Power Lines

Potential Distribution Analysis of Suspended-Type Metal-Oxide Surge Arresters

The Research and Design of Parameters for 750kv Transmission Line Metal-Oxide Surge Arresters with Series Gap

Potential relation between resistors and porcelain in 1000kVMOA

Potential Relation between Resistors and Porcelain in 1000 kV MOA

Grading Structure Design of Surge Arrester for 1000-Kv Ultra-high Voltage Air-insulated Substation