Abstract:Experimental and simulation results show that the increase in volume fraction of KFRP grows the critical penetration velocity of C/K hybrid composite laminates and that KFRP is better as an impact surface. This study investigated the high‐velocity impact behavior of composite plates with different hybrid ratios and structural configurations through experimental and numerical simulation studies. The results showed that the critical penetration velocity of the composite plate generally increases with an increase in the volume fraction of aramid fibers. The high‐velocity impact finite element model developed in this study accurately simulated the high‐velocity impact behavior of laminated fiber composite plates with various hybrid ratios and different structures. The impact failure patterns of the plates were analyzed, and it was observed that the carbon fibers on the back face were prone to tensile fracture, followed by the gradual fracture of aramid fibers. The numerical simulation results show significant differences in residual impact velocity and energy absorption when impacted from different sides and the impact from the aramid side resulted in better energy absorption, which is contrary to the findings in many existing research papers. These findings provide valuable insights into the impact resistance of composite materials and can guide the design and development of high‐performance composite structures for aero‐engine case designing. Highlights The high‐velocity impact behavior of C/K fiber epoxy resin matrix composite laminates are studied. The critical penetration velocity increases with the increase of aramid fiber volume fraction. The laminate absorbs most of the impact energy during the instantaneous impact time. Energy absorption ability is better when the impact surface is aramid fibers. Carbon fibers on the back side of the laminate are more prone to tensile fracture.

Impact energy absorption and dynamic viscoelasticity of composites

Exploration of Energy Absorption and Viscoelastic Behavior of CFRPs Subjected to Low Velocity Impact

Experimental Study of Dynamic Mechanical Properties of Composite Laminate Plate under the Impact Loading

Changes in Dynamic Mechanical Behavior of Carbon Fiber Reinforced Polymer Laminates under Multiple Low Energy Impacts

Impact responses and residual flexural properties of narrow CFRP laminates

Examination of Low-Velocity Impact and Mechanical Properties After Impact of Fiber-Reinforced Prepreg Composites: Low-Velocity Impact and Mechanical Properties after Impact

Analysis on the impact response of fiber-reinforced composite laminates: an emphasis on the FEM simulation

Experimental and numerical investigations on the dynamic response of woven carbon fiber reinforced thick composite laminates under low-velocity impact

Low-velocity impact behavior and residual tensile strength of CFRP laminates

Low-velocity Impact Damage Research on CFRPs with Kevlar-fiber Toughening

Low Velocity Impact Response and Energy Absorption Behavior on Glass Fibre Reinforced Epoxy Composites

Energy Absorption Efficiency of Carbon Fiber Reinforced Polymer Laminates under High Velocity Impact

High‐velocity impact resistance and energy absorption behavior of Carbon‐Kevlar hybrid composite laminates

Experimental investigation of the impact behavior of glass/epoxy composite materials with the natural fiber layer

Energy dissipation mechanism of fiber metal laminate under low-velocity impact

Low-velocity impact and compression-after-impact behaviors of twill woven carbon fiber/glass fiber hybrid composite laminates with flame retardant epoxy resin

Impact Damage Modes and Residual Flexural Properties of Composites Beam

Experimental Study on Low-Velocity Impact Performance of Carbon Fiber Reinforced Composite Laminates

A Comparative Study on the Low Velocity Impact Behavior of UD, Woven, and Hybrid UD/woven FRP Composite Laminates

Impact Response and Energy Distribution of Low Velocity Impact on Composite Laminates

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact