Abstract:Experimental and simulation results show that the increase in volume fraction of KFRP grows the critical penetration velocity of C/K hybrid composite laminates and that KFRP is better as an impact surface. This study investigated the high‐velocity impact behavior of composite plates with different hybrid ratios and structural configurations through experimental and numerical simulation studies. The results showed that the critical penetration velocity of the composite plate generally increases with an increase in the volume fraction of aramid fibers. The high‐velocity impact finite element model developed in this study accurately simulated the high‐velocity impact behavior of laminated fiber composite plates with various hybrid ratios and different structures. The impact failure patterns of the plates were analyzed, and it was observed that the carbon fibers on the back face were prone to tensile fracture, followed by the gradual fracture of aramid fibers. The numerical simulation results show significant differences in residual impact velocity and energy absorption when impacted from different sides and the impact from the aramid side resulted in better energy absorption, which is contrary to the findings in many existing research papers. These findings provide valuable insights into the impact resistance of composite materials and can guide the design and development of high‐performance composite structures for aero‐engine case designing. Highlights The high‐velocity impact behavior of C/K fiber epoxy resin matrix composite laminates are studied. The critical penetration velocity increases with the increase of aramid fiber volume fraction. The laminate absorbs most of the impact energy during the instantaneous impact time. Energy absorption ability is better when the impact surface is aramid fibers. Carbon fibers on the back side of the laminate are more prone to tensile fracture.

Energy Absorption Efficiency of Carbon Fiber Reinforced Polymer Laminates under High Velocity Impact

High Velocity Impact Response of Composite Lattice Core Sandwich Structures

Exploration of Energy Absorption and Viscoelastic Behavior of CFRPs Subjected to Low Velocity Impact

Changes in Dynamic Mechanical Behavior of Carbon Fiber Reinforced Polymer Laminates under Multiple Low Energy Impacts

Impact responses and residual flexural properties of narrow CFRP laminates

The Energy Absorption of Carbon Fiber Reinforced Polymer under Different Impact Speed

Low-velocity impact behavior and residual tensile strength of CFRP laminates

Low-velocity Impact Damage Research on CFRPs with Kevlar-fiber Toughening

High‐velocity impact resistance and energy absorption behavior of Carbon‐Kevlar hybrid composite laminates

Study on Absorbing Energy Character of Functionally Graded Plate of GFRP/CFRP

Experimental Investigation of the Double Impact Position Effect on the Mechanical Behavior of Low-Velocity Impact in CFRP Laminates

Damage Mechanisms and Analytical Model of CFRP Laminate under Low-Velocity Normal and Oblique Impacts

Finite Element Analysis of Configuration and Fiber Orientation Effects on Fiber Metal Laminates Subjected to Low Velocity Impact

Experimental Research on CFRP Laminates with Different Impact Energy Levels

Energy dissipation mechanism of fiber metal laminate under low-velocity impact

Impact energy absorption and dynamic viscoelasticity of composites

Experimental and Numerical Investigation of Aramid Fibre Reinforced Laminates Subjected to Low Velocity Impact

Comparative Study on the Low-Velocity Impact Properties of Unidirectional Flax and Carbon Fiber Reinforced Epoxy Plates

Analysis on the impact response of fiber-reinforced composite laminates: an emphasis on the FEM simulation

Finite Element Study on the Impact Resistance of Laminated and Textile Composites.

Correlation between Drop Impact Energy and Residual Compressive Strength According to the Lamination of CFRP with EVA Sheets