Abstract:One of the long-standing mechanical challenges associated with shape memory alloys (SMAs) is achieving and stabilizing an evolving two-way shape memory effect (TWSME) through thermomechanical training/cycling. In most martensitic NiTi SMAs that exhibit zero TWSME at room temperature, the TWSMEs typically require hundreds of cycling repetitions to track trivial values. This demonstrates a promising solution to overcome this challenge. The surface of NiTi SMA sheets was treated by depositing a certain number of titanium (Ti) powder layers on the NiTi surface using a laser beam. The results showed that a unique TWSME of approximately 12% with good stability was achieved after 100 cycles when the optimum number of five Ti layers was deposited, which was much higher than that of the NiTi sheet (0.3% TWSME) and the sample with a single-time laser path irradiation (1.8%). This was attributed to the low coefficient of thermal expansion of the Ti vs. NiTi sheet, which prevented reverse bending during heating, and the formation of Ti-rich intergranular Ti2Ni(Ox) precipitates, which hindered dislocation movement. Meanwhile, in this sample, owing to the generation of a large residual tensile stress and a large heat-affected zone that led to a reduction in plastic zones, the one-way shape memory effect (OWSME) was retained at values above 90% with good stability over cycling. However, the introduction of additional Ti layers can cause problems in terms of oxygen accumulation within the NiTi sheet, which should be considered when designing a product.

Effect of laser gas nitriding for biological activities on NiTi alloy

Laser Gas Nitriding Modified on NiTi Shape Memory Alloy

Characterization of the laser gas nitrided surface of NiTi shape memory alloy

Surface Characteristics and Corrosion Behavior of Laser Surface Nitrided NiTi Shape Memory Alloy for Biomedical Applications

Laser Surface Nitriding of Niti Shape Memory Alloy for Biomedical Applications

Laser surface modification of titanium alloy used as biomaterial

Microstructure and Characteristics of Ion-nitrided Layer on Surface of NiTi SMAs

Laser Surface Nitriding and Texturing of NiTi Shape Memory Alloy for Bonding with Bioactive Glass

Laser and Electron-Beam Surface Processing on NiTi Shape Memory Alloys: A Review

Remarkable biocompatibility enhancement of porous NiTi alloys by a new surface modification approach: in-situ nitriding and in vitro and in vivo evaluation.

Enhanced Bioactivity of Biomedical Niti Through Surface Plasma Polymerization

Influence of TiN coating on the biocompatibility of medical NiTi alloy

IN-SITU SYNTHESIZED TiN REINFORCED MMC COATING BY LASER CLADDING ON NiTi ALLOY

Effect of Surface Treatment on the Biological Compatibility of NiTi Shape Memory Alloy

Effect of Nd:YAG Laser-Nitriding-treated Titanium Nitride Surface over Ti6Al4V Substrate on the Activity of MC3T3-E1 Cells

Laser deposition of titanium layer to enhance two-way shape memory behavior of Nitinol sheet

Enhancing the adhesive bonding strength of NiTi shape memory alloys by laser gas nitriding and selective etching

Fabrication, Nanomechanical Properties And In Vitro Evaluation Of (Ti, O)/Ti Composite Coating On Niti Shape Memory Alloy

Research Progress in Surface Modification of Biomedical NiTi Alloys

Surface Modification of Dental Nickel-Titanium Shape Memory Alloys

Tailoring the Surface of NiTi Alloy by TiN Coating for Biomedical Application