Abstract:Ultrasonic wedge bonding of aluminum (Al) wires is a widely applied interconnect technology for power elec-tronic packaging. The joint quality of the wedge bonding is mainly affected by the process parameters and material properties. Inappropriate process parameters will lead to failure modes such as chip surface pit, metal layer peeling off, wire cracking, non-sticking to the pad, etc., which limits the long-term stability of power devices. In order to reach the desired reliability, the design of experiment (DoE) is generally deployed which is costly in terms of time and related materials. Therefore, simulation-assisted analysis is in demand to rapidly narrow down the process windows. In this paper, an ultrasonic bonding model involving thick Al wires (300 mu m) was established based on the Finite Element Method (FEM), to optimize process parameters effectively with reduced time and cost. The model was designed in ANSYS utilizing the transient structural mechanics module with various stresses and ultrasonic power, to simulate the relative deformation of the bonded wires and the displacement against the substrate. The result was then verified by ultrasonic wedge bonding samples with 9 sets of process parameters. The stress distributions were simulated and analyzed with the failure modes of tensile strength tests, while the deformation of wires under various process parameters was measured and compared with shear strength tests. Further, the relationship between the failure modes of the joint and the deformation was then analyzed by Response Surface Method (RSM), and the regression equation of the wire deformation and related process parameters was established and fitted with the actual sample's data. Such analysis not only found the optimum range of the deformation of thick Al ultrasonic wire bonds but also quickly provided a range of optimized processes for Al thick wires applying ultrasonic wedge bonding techniques.

Observation of ultrasonic Al-Si wire wedge bond interface using high resolution transmission electron microscope

Al-clad Cu Bond Wires for Power Electronics Packaging: Microstructure Evolution, Mechanical Performance, and Molecular Dynamics Simulation of Diffusion Behaviors

Study on interface behavior of Be/CuCrZr alloy by diffusion bonding

High-Resolution Electron Microscope Observation of Interface Microstructure of A Cast Al-Mg-Si-Bi-Pb(6262)/Al2o3p Composite

Finite element modeling and analysis of ultrasonic bonding process of thick aluminum wires for power electronic packaging

Transient solid-liquid interfacial reaction between Al wire and Au/Cu pad during parallel gap micro-resistance welding

Ultrasonic Friction Power During Al Wire Wedge-Wedge Bonding

Investigation of Interfacial Layer for Ultrasonic Spot Welded Aluminum to Copper Joints.

Finite element analysis on ultrasonic propagation of interface bonding of bimetal composites

Microstructural studies of Cu-Al Intermetallic Compound at Thermosonic Wire Bonding Interface

Effect of the interface characteristics on the joint properties and diffusion mechanisms during ultrasonic metal welding of Al/Cu

Investigations of Silicon Wafer Bonding Using Thin Al and Sn Films for Heterogeneous Integration

Low Temperature Al Based Wafer Bonding Using Sn As Intermediate Layer

Composite Nanowires for Room-Temperature Mechanical and Electrical Bonding

Mechanical Issues of Cu-to-Cu Wire Bonding

Microstructure evolution and mechanical properties of Al/Cu ultrasonic spot welded joints during thermal processing

Aluminum-coated silicon wafer bonding with tin intermediate layer

Microstructure evolution and mechanical properties of Cu–Al joints by ultrasonic welding

In-Situ Observation and Analysis of the Evolution of Copper Aluminum Composite Interface

Ultrasonic non-destructive evaluation study of molecular diffusion bonding of thin copper-aluminum electrode sheets

Phase transformation behavior of Al-Au-Cu intermetallic compounds under ultra-fast micro resistance bonding process