Abstract:Organic light-emitting diode (OLED) has attracted considerable attention due to their unique image quality and market potentials in display field. Efficient blue, green and red emitters with excellent color purity are required for full-color display application, so far great improvements have been achieved for the life time and efficiency of the red and green materials. However, the blue emitting material is still a barrier to commercial applications of OLEDs.Using vacuum thermal evaporation method, blue OLEDs were fabricated by inserting a bathocuproine (BCP) as hole blocking layer (HBL) into conventional double layer (DL) device at the interface of N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine (NPB)/8-hydroxyquinoline aluminum (Alq3). Device structure is indium tin oxide (ITO)/NPB/BCP/Alq/Mg∶Ag, where NPB acts as both hole transporting layer (HTL) and emitting layer (EML), and Alq3 as electron transport layer (ETL). The active emissive area of each device defined by the overlap of ITO and Mg∶Ag was 4 mm×4 mm. Measurements of luminance-voltage (L-V) and current density-voltage (J-V) characteristics were carried out with a Keithley 4200 Semiconductor Characterization System, photoluminescence (PL) and electroluminescence (EL) spectra were measured with an OPT-2000 system. The luminance-voltage and current density-voltage characteristics of devices were investigated, and dif-ferences between their performances were discussed. The results demonstrate that the maximum luminance and luminance efficiency of the BCP device are 2 900 cd/m2 and 0.55 lm/W, respectively. The peak of electroluminescence (EL) spectrum locates at 445 nm and the Commissions Internationale d′Eclairage (CIE) coordinates are (x=0.16, y=0.09), which are independent on the variation of bias voltage. Energy level diagrams were employed to analyze the diversity of device performance with different structures. We find that the high EL performance of the BCP device is attributed to better balance of carriers in the NPB layer by inserting BCP as hole blocking layer (HBL). Optimization of device structure and performance, via adjusting thickness of organic layers, is under investigation.

Study on Blue OLED with TPBi As Emitting Host Material

Influence of various doping ratio on optical and electronic performance of blue organic light-emitting diodes

High efficiency and color saturated blue electroluminescence by using 4,4′-bis[N-(1-naphthyl)-N-phenylamino]biphenyl as the thinner host and hole-transporter

Fabrication and Characterization of Blue Organic Light-emitting Diodes Based on N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine

High-efficiency Blue Organic Light-Emitting Devices Based on Phosphorescent Dopant Material

The Influence of the Mixed Host Emitting Layer Based on the TCTA and TPBi in Blue Phosphorescent OLED

Weakly Conjugated Phosphine Oxide Hosts for Efficient Blue Thermally Activated Delayed Fluorescence Organic Light-Emitting Diodes

High-Efficiency Blue Fluorescence Organic Light-Emitting Diodes with Dpvbi Inserted in the Doping Emmision Layer

Characteristics of a Double Layers White Organic Electroluminescent Device Using TBPe As Dopant in a Blue Mixed Layer

Comprehensive Study On The Electron Transport Layer In Blue Flourescent Organic Light-Emitting Diodes

Deep blue emitter with a combination of hybridized local and charge transfer excited state and aggregation-induced emission features for efficient non-doped OLED

Highly Efficient Non-Doped Deep-Blue OLED with NTSC CIEy and Negligible Efficiency Roll-off Based on Emitter Possessing Hydrogen Bond and Hybridized Excited State

Studies on the Performances of Blue Organic Electroluminescent Device with Different Electron Transport Layers

High Efficient Undoped Blue Organic Light-Emitting Devices Based on N-BDAVBi

Blue and White Organic Light-Emitting Diodes Based on 4,4 '-Bis(2,2 ' Diphenyl Vinyl)-1,1 '-Biphenyl

Improvement of Blue OLEDs Performance by Adjusting the Thickness of Hole Transport Layer

Efficient Solution-Processed Blue and White OLEDs Based on a High-Triplet Bipolar Host and a Blue TADF Emitter

Influence of doped materials on the performance of blue organic electroluminescent devices

Stable and Efficient Blue Fluorescent Organic Light-Emitting Diode by Blade Coating with or Without Electron-Transport Layer

An electron transporting blue emitter for OLED

Efficient Blue Organic Light-Emitting Diodes with Simple Structure Based on N, N '-Bis (1-Naphthyl)-n, N '-Biphenyl-1, 1 '-Biphenyl-4,4 '-Diamine