Abstract:The effect of the composite hole transporting layer with different polystyrene (PS)-triphenyl diamine (TPD) mass ratios on the performance of organic light-emitting devices (OLEDs) was investigated. By using this blending system as hole transporting layer, a double-layer organic light-emitting device was fabricated with the structure of indium-tin-oxide (ITO)/polystyrene (PS):N, N′-bis (3-methylphenyl)-N, N′-diphenylbenzidine (TPD)/tris-(8-hydroxyquinoline)-aluminum (Alq 3)/Mg:Ag by the spin-coating technique. For comparison, a similar double-layer device was fabricated using pure TPD as hole transporting layer by thermal vacuum deposition method. The hole drift mobility of PS-TPD thin films with different mass ratios was characterized by time-of-flight method, and electroluminescent characteristics of these devices were measured. Results demonstrated that the hole mobility of blending thin films is 1-2 orders of magnitude lower than that of pure TPD film. When the mass ratio is m (PS):m (TPD) = 10:90, the device has a maximum luminance of 14280 cd/m 2 and a maximum lumen efficiency of 1.2 lm/W. It was concluded that the incorporation of PS with proper concentration will lower the hole mobility of the functional layer, adjust the hole transporting ability of TPD, more effectively balance the number of positive and negative charge carriers in the recombination zone, and thus enhance the luminance and efficiency of the device.

Study of Orange Organic Light-emitting Devices Based on MEH-PPV Polymer

A Novel Organic Electroluminescent Device Using A New Eu3+ Polymer As Emitting Layer

Peformance Enhancement Of Organic Light-Emitting Diodes Based On Different Hole Transport Layers

Studies on the Performances of Blue Organic Electroluminescent Device with Different Electron Transport Layers

Study of Flexible Organic Light-emitting Devices

Polymer Doped High Brightness Phosphorescent Organic Light-Emitting Diodes

Study on the Performance of Organic Light-Emitting Diode with N,N'-Bis(3-Methylphenyl)-N,N'-Diphenylbenzidine Doped in Polystyrene As Hole Transporting Layer

Structure Optimization of Organic Light-Emitting Devices

Study on High-Brightness Green Organic Light-Emitting Devices Using PS-TPD as Hole Transporting Layer

Organic Light-Emitting Diodes Based on New Silole Derivatives

Organic Light-Emitting Devices Based on Novel Hole Transport Layer

Small molecular and polymer organic light-emitting diodes based on novel iridium complex phosphor.

Bright-Yellow Organic Light-Emitting Device Using Novel Silole Derivative As Emitter

Influence of Surface Modification of IndiumTin Oxide on Performance of Organic Light Emitting Diodes

The colour-tuning effect of 2,9-dimethyl-4,7-diphenyl-1, 10-phenanthroline in blue–red organic light-emitting devices

Study on Organic Light-Emitting Diodes Based on Ultrathin Non-doped Emitters

Orange and red emitting OLEDs based on phenothiazine polymers

Efficient small molecular and polymer organic devices using bis[2-(4-tert-butylphenyl)benzothiazolato-N,C2′] iridium (III) (acetylacetonate) dye as emitter

Efficient Blue Organic Light-Emitting Diodes with Simple Structure Based on N, N '-Bis (1-Naphthyl)-n, N '-Biphenyl-1, 1 '-Biphenyl-4,4 '-Diamine

Organic Light-Emitting Diodes Based On Bipolar Material Flamb-1t

Studies on a New Type of Metal Chelate OLED