Abstract:Aims: The paper presents a new theoretical model of an electric arc in a circuit breaker with reference to the role of shunt resistance parallel to the electric arc in a circuit breaker switch. One of the goals of the paper is to show the efficiency of using the software package MATLAB Simulink in which the previously derived system of equations is easily implemented in the blocks of the mentioned software package. Methodology: The discharges in the electric arc determine the potential between the metal contacts of the switch and the structure and shape of the electric arc make it difficult to solve the transient process. The main step in solving the problem is the formation of a theoretical model of the electric circuit from which the current and voltage can be determined, which depend on the parameters of the electric field in the arc. The use of shunts in oil and air switches, due to a number of shortcomings, was not possible, but the disadvantages are overcome if thyristors are used to interrupt the current. The equations and the algorithm for solving the problem are obtained from the parameters of the electric field potential that shape the electric arc and its path. The accuracy of the theoretical model is confirmed by voltage and current diagrams in the adapted MATLAB Simulink software package. Conclusion: The presented theoretical model and algorithm are universal and can be used for different states in which an electric line can be found. Problems that occur in the analysis of transient processes in an electric circuit where an electric arc occurs can be minimized using different types of simulations. Changing any parameter in the electrical circuit requires a new calculation of the state of the circuit from the very beginning due to the new initial conditions. Analytical methods combined with the simulation method were used in the research of overvoltages, asymmetries and harmonics during the appearance of an electric arc. The MATLAB simulation program had a threefold purpose: to serve the calculation and simulation of quantities that can be obtained by testing or measurement, to establish the original algorithm and to verify the proposed method. Also, this type of simulation can replace the type tests of the electric arc on the switch.

Review of the Investigations on the Modeling and Characteristics of Air Switching Arc

Research of simulation and experiment on arc characteristics of gas mechanical switch

Mathematical Modeling and Simulation of Extra-high Pressure Switching Air Supply

Experimental Research on the Thermal Characteristic of Low-Voltage Alternating Current (AC) Arc Faults

CFD Arc Simulation of a Switching-off Process in a Model Chamber

Simulation and Experimental Analysis of Arc Motion Characteristics in Air Circuit Breaker

DC Arc Numerical Calculations and Experimental Researches Based on the Arcing Horn Used in Over-head Line

Research on Improved Schwarz Arc Model Considering Dynamic Arc Length

Simulation of Fault Arc Using Conventional Arc Models

Experimental research on the fault arc arcing process and electrode temperature distribution of a 220VAC power system

Numerical investigations of AC arcs' thermal characteristics in the short gap of copper-cored wires

Simulation study on arc motion process of DC miniature circuit breakers

Switching arc simulation

Parametric characterization of arcs in semi-sealed splitter plate DC circuit breakers

Analysis of the characteristics of gas insulated, multiple-stage, high voltage switches

Researches on Spectrums and Macroscopic Forms of DC Arc in a Short Air Gap

Study on Breakdown Characteristics and Attenuation Characteristics of Air Mixed Gas

Influence of series RC circuit parameters on the streamer discharge process of gas spark switch

Simulation of Arc Characteristics in Miniature Circuit Breaker

Arc stability and ablation characteristics in O2, N2, and air environments

New Theoretical Model of Electric Arc in Circuit Breaker and the Role of Parallel Resistance – The Shunt