Abstract:The advantages of high-efficiency and pumpless long-distance heat transport make the two-phase loop thermosyphon (TPLT) a promising candidate for various energy- and thermal-related applications. In this work, the simultaneous temperature/pressure measurement and high-speed visualization observation were conducted to compare and evaluate the heat transfer performance and two-phase flow characteristics of a vertical-positioned TPLT having an inner diameter of 10 mm. R141b was used as the working fluid at volumetric filling ratios of 35-50 %. The TPLT functioned well and had high heat transfer capacity at relatively high filling ratios (>= 40 %), while it failed to operate at a low filling ratio of 35 % under the power inputs greater than 250 W due to the local dry-out. A maximum effective thermal conductivity of 2.0 x 10(5) W/(m center dot K) was achieved at the optimal filling ratio of 40 %. Further, a flow regime map was developed to identify the combination effect of filling ratio and heat power on the flow pattern evaluation and two-phase flow instability. The geyser boiling usually manifests itself as an alternation of two or even three flow patterns, and tends to occur at the combination conditions of relatively low filling ratios (35 % and 40 %) and low heat powers or a moderate filling ratio (50 %) and relatively high heat powers. Additionally, the white mist phenomena caused by the flash vaporization was observed in the riser at relatively higher power inputs. The liquid-vapor mixture flow in the riser would partially degrade the TPLT performance due to the inhibition of vapor condensation in the condenser region. This study provides new insight into the operation characteristics of TPLT and gives guidelines for proper design and applications.

RESEARCH ON THE THIMBLE HEAT-TRANSFER METHOD AND ITS CHARACTERISTIC OF SURFACE WATER SOURCE HEAT PUMP SYSTEM

Numerical Simulation and Analysis on the Heat Transfer of the Vertical Ground Heat Exchanger in Hydrous Soil

Heat Transfer Forms and Efficiency Analysis of Urban Sewage Delivery Heat Transfer System

Experimental Study on an Thermosyphon Loop with Bubble Pump Effect

THERMODYNAMIC ANALYSIS ON AN AMMONIA WATER ABSORPTION-RESORPTION SYSTEM FOR HEAT PUMP APPLICATION

Investigation on Heat Transfer and Pressure Drop Characteristics of Multi-Row Helically Coiled Tube Heat Exchanger for Surface Water-Source Heat Pump

Flow Resistance and Energy Analysis of Urban Sewage Delivery Heat Transfer System

Comparative experimental study on the thermal and hydraulic performances of capillary box heat exchanger and helical coil heat exchanger for surface water-source heat pump

Theoretical and Experimental Study on Heat Transfer Characteristics of Water Heat Pipe

Transient Numerical Investigation of a Thermal-Driving Water Pipe Cooling System

Numerical Investigation on Three-fluid Heat Exchanger for Hybrid Energy Source Heat Pumps

Temperature field analysis of underground water source heat pump based on surfacelet finite element method

Comparison Work about Different Empirical Formulas for the Boiling Heat Transfer Coefficient in Separated Heat Pipe System

Analysis of Solidification Heat Transfer Process on Double-Convection Condition

Application Prospect Analysis of Surface Water Source Heat-pump in China

Experimental Investigation on the Performance of Ground-source Heat Pump with the Refrigerant R410A

Research on an Instantaneous Cooling-Heating-Hot Water Multi-purpose Equipment

System forms and application about urban wastewater as a cool and heat source

Heat Transfer Characteristics and Operational Visualization of Two-Phase Loop Thermosyphon

NUMERICAL INVESTIGATION ON HEAT STORAGE AND HEAT EXCHANGE OF THE SHELL-AND-TUBE PHASE CHANGE HEAT EXCHANGER

Thermo-economical Analysis of Heat Recovery Application of the Integral Heat Pipe Heat Exchanger