Abstract:In this work, a surface dielectric barrier discharge (SDBD) device coupled with power electronics technology was designed for precise control of the ground-electrode temperature to investigate the dynamic behavior of the physicochemical processes and biological inactivation functions involved in SDBD plasma. It was found that an increase of the electrode temperature from 30 to 210 degrees C reduced the breakdown voltage and increased the current pulse amplitude because the reduced electric field strength and average electron density of the SDBD plasma were consistently enhanced. The change in the plasma-chemistry mode (O-3-dominant to NO x -dominant) was more sensitive to the ground-electrode temperature than that of the power density and gas temperature. O-3 in the gas and liquid phases could not be detected at electrode temperatures above 90 degrees C, and the NO x mode almost immediately occurred after the plasma was turned on for ground-electrode temperatures of > 180 degrees C. The increase in the electrode temperature increased the acidity of the plasma-activated water and, more importantly, short-lived reactive species OH and NO were detected at electrode temperatures > 120 degrees C in the case of aqueous solutions treated directly with SDBD plasma. The biological inactivation function of the SDBD plasma, i.e. for bacterial suspensions and tumor cell cultures, was improved by about three orders of magnitude and 40% at the optimal electrode temperatures of 180 degrees C and 120 degrees C, respectively. This is an important breakthrough for development of SDBD-based biomedical devices for specific purposes on a commercial level by regulating the plasma chemistry through the ground-electrode temperature, overcoming the limitations of chamber heating and compressed air supply.

Study on SO 2 Removal Efficiency by Nanosecond Rising Edge Pulse DBD under Different Environmental Conditions

Energy efficiency optimization for H2S removal by dielectric barrier discharge plasma

Experimental Study of SO2Removal by Pulsed DBD along with the Application of Magnetic Field

Investigation of Dielectric Barrier Discharge and Dielectric Barrier Corona Discharge in SO2 Removal

Study of the Desulfurization by High Frequency Dielectric Barrier Discharge

Effect of packed quartz pellets on DBD plasma treating with NO

Air Disinfection by Nanosecond Pulsed DBD Plasma

Removal of SO2F2 by the Packed Bed Dielectric Barrier Discharge Plasma

Investigation Of Factors Influencing Nox Remediation By High Frequency Dielectric Barrier Discharge Plasma

Effects of Pulse Rise Time and Pulse Width on Discharge Mode Transition of SDBD Plasma under Repetitive Pulses

Comparative Study Between Single- and Double-Dielectric Barrier Discharge Reactor for Nitric Oxide Removal

Experimental Study of Nanosecond Pulsed Barrier Discharges in Air Manipulated by Pulse Width

Decomposition of Dimethyl Sulfide in a Wire-Cylinder Pulse Corona Reactor

Effects of the Ground-Electrode Temperature on the Plasma Physicochemical Processes and Biological Inactivation Functions Involved in Surface Dielectric Barrier Discharge

Characteristics of Nanosecond-pulse Dielectric Barrier Discharge in Atmospheric Air

Realization of meter-scale and high-density of charged particles by surface dielectric barrier discharge

The effects of inner electrode shape on the performance of dielectric barrier discharge reactor for oxidative removal of NO and SO2

Effect of Nano- to Millisecond Pulse on Dielectric Barrier Discharges

Investigation on the Characteristics of Dielectric Barrier Surface Discharge Driven by Repetitive Nanosecond Pulses in Airflows

Experimental research of diffuse bi-directional pulsed dielectric barrier discharge plasma

Efficiency of Removing Sulfur Dioxide in the Air by Non-Thermal Plasma along with the Application of the Magnetic Field