Abstract:Traditional contact heat flux sensors suffer from a lack of dynamic performance, and existing non-contact optical heat measurement equipment fails to detect convective heat transfer effectively. This limitation precludes the effective testing of composite heat flux in explosive fields. This study introduces an ultra-responsive atomic layer thermopile (ALTP) heat flux sensor, developed and employed for the first time, to evaluate the transient heat flux associated with thermobaric explosions. Measurements reveal that the ALTP sensor's temporal resolution surpasses that of the thermal resistance thin film heat flux sensor (TFHF), attaining a spectral response time of 10 μs under pulsed laser irradiation. Beyond these radiation-based tests, the present work also conducted novel simulation analyses of high-temperature jet impacts using COMSOL software. Static simulation discovered that fluid velocity significantly influences ALTP's sensitivity, resulting in an error of 71%. Conversely, dynamic simulation demonstrated that an increase in fluid velocity reduces the ALTP's time constant, whereas other factors such as fluid temperature exert minimal impact on its dynamic characteristics. This confirms that the simulation model compensates for the cost and accuracy deficiencies of convection heating tests. It also provides a new way to analyze the error of explosive heat flux measurement caused by sensitivity fluctuation and insufficient dynamic performance. In thermobaric explosive trials, the maximum heat fluxes recorded were 202 kW/m2 in semi-enclosed environments and 526 kW/m2 in open environments. A distinctive double-wave phenomenon was evident in the test curve. By a fast-response thermocouple, the study was able to differentiate between radiation and convective heat flux in the explosion field. The findings substantiate that the ALTP sensor amalgamates the benefits of optical thermal measurement tools with those of traditional contact heat flux sensors, thereby facilitating composite heat flux measurements in the challenging conditions of an explosive field.

Design of A Silicon Beam for Detecting Deflagration of Trace Explosive

A study on integrated system of tracer gas leakage detection in detonation experiment

Design of a Beam-coupling System for a Chip-integrated Spectrometer with a Discrete Linear Waveguide

Design of a Silicon Beam Resonator for a Novel Gas Sensor

Trace Detection of Energetic Substances Using Silicon Dioxide Microbridge-Based Micro-Calorimetric Sensors

Transient Scanning Electron Beam Annealing Methods Used to Study Diffusion and Defects in Implanted Silicon

Trace Explosive Detection Based on Photonic Crystal Amplified Fluorescence

An Instrument for Precision Controlled Radiation Exposures, Charged Beam Profile Measurement, and Real-time Fluence Monitoring Beyond $10^{16}$ n$_{\textrm{eq}}$/cm$^{2}$

Detection of Trace Explosives Using a Novel Sample Introduction and Ionization Method

DESIGN OF A NON-INTERCEPTING BEAM DIAGNOSTIC DEVICE USING NEUTRAL BEAM FLUORESCENCE METHOD

Development and Performance Analysis of an Atomic Layer Thermopile Sensor for Composite Heat Flux Testing in an Explosive Environment

Development of a silicon carbide radiation detection system and experimentation of the system performance

Synchronous Full-Field Measurement of Temperature and Deformation of C/SiC Composite Subjected to Flame Heating at High Temperature

Novel Electro-Explosive Device Incorporating a Planar Transient Suppression Diode

Preliminary development of a dust explosion equipment for time-resolved SAXS experiment with synchrotron radiation

Development of an Integrated Silicon Slapper Detonator

Theoretical Analysis and Numerical Simulation of the Motion of RDX Deflagration-Driven Flyer Plate Based on Laser-Initiated Micro-Pyrotechnic Devices

Measurement and Evaluation of Local Surface Temperature Induced by Irradiation of Nanoscaled or Microscaled Electron Beams.

Design and Performance of a Micro-Scale Detonation Train with a Built-in Pyrotechnic MEMS-based Safety and Arming Device

Research on the detection of silica/phenolic composite surface cracks using instantaneous high-power xenon lamp-induced chirp-pulsed radar thermography

Using of Fiber-Array Diagnostic to Measure the Propagation of Fast Axial Ionization Wave During Breakdown of Electrically Exploding Tungsten Wire in Vacuum