Abstract:The characteristics of the electrical explosion of aluminum wire in a vacuum and in the air are investigated.The process of energy deposition is derived from the typical voltage and current waveforms.The energy deposited into the aluminum wire at the instant of voltage breakdown is very important for estimating the state of the metal wire.Energy of~2.8 eV/atom is deposited into the aluminum wire in a vacuum at the instant of voltage breakdown.However,the current flowing through the load for the electrical explosion of aluminum wire in the air decreases to zero gradually after the onset of the phase explosion,coming into the dwell stage.Energy of about 6 eV/atom is deposited into the wire at the instant of voltage breakdown for exploding aluminum wire in the air.Temperatures of 0.9 eV and 0.4 eV are estimated for exploding aluminum wires in a vacuum and in the air according to the experimental data combined with the transport coefficient model.The dwell stage is a significant feature for exploding aluminum wires in the air.The dependence of the dwell time on the initial charging voltage of the primary energy-storage capacitor is derived.The dwell time decreases from 95 ns to 17 ns with the increase of the initial voltage from 13 kV to 17 kV.The optical diagnostic equipment with high spatial and temporal resolution is constructed by a 532 nm,30 ps laser probe.The shadowgram demonstrates the expansion trajectories of the high-density products in different media.The expansion velocities of the high-density core for exploding aluminum wire in a vacuum and in the air are 1.9 km/s and 3 km/s,respectively.The energy deposition into the aluminum wire near the electrode region is slightly higher than in the middle region due to the polarity effect, which is analyzed by the distribution of the radial electric field on the wire surface.Because the explosive emission of the electrons is suppressed substantially by the air,the structure of the energy deposition for exploding aluminum wire in the air is more homogeneous.The structures of the energy deposition and the expansion trajectory of the shock wave are analyzed.The schlieren diagnostic is used to translate the exploding products with different refractivities.The schlieren images for exploding aluminum wire in a vacuum show that the metal wire is exploded into two-phase structure,i.e.,the low-density high-temperature corona plasma surrounding the high-density low-temperature core.However,the schlieren images for exploding aluminum wire in the air demonstrate that in addition to the core-corona structure,the channels of shock wave and compressed air layer are formed.The expansion trajectory of the shockwave front is derived according to the optical diagnostics.

Using of Fiber-Array Diagnostic to Measure the Propagation of Fast Axial Ionization Wave During Breakdown of Electrically Exploding Tungsten Wire in Vacuum

High-Speed Imaging of Transition from Fluid Breakup to Phase Explosion in Electric Explosion of Tungsten Wires in Air

Study of Density Distribution of Electrical Exploding Tungsten Wire in Air

Study on Electrical Explosion of Bare and Insulation Coated Tungsten Wires

Discharge Channel Development of Microsecond Tungsten Wire Explosion in Air

Fully Vaporized Electrical Explosion of Bare Tungsten Wire in Vacuum

Observation of Fast Expansion Velocity with Insulating Tungsten Wires on ∼80 Ka Facility

Energy Deposition in Electrical Explosion of Silver Wire in Vacuum

Single wire exploding experiments on fast linear transformer driver

Experiment measuring the energy deposition and expansion rate of exploding copper wires in vacuum using negative polarity current

Electrical Explosion Across Gas–liquid Interface: Aerosol Breakdown, Shock Waves, and Cavity Dynamics

Spatial and Temporal Distribution Characteristics of an Exploding Aluminum Wire Immersed in Argon Gas

Experimental Investigation on the Energy Deposition and Morphology of the Electrical Explosion of Copper Wire in Vacuum

Explosion Symmetry Improvement of Polyimide-Coated Tungsten Wire in Vacuum on Negative Discharge Facility

Measuring the Dynamic Polarizability of Tungsten Atom Via Electrical Wire Explosion in Vacuum

Mass Density Evolution of Wire Explosion Observed Using X-Ray Backlight

Experimental Investigation on the Electrical Explosion of Single Aluminum Wire in Vacuum

Transforming Dielectric Coated Tungsten and Platinum Wires to Gaseous State Using Negative Nanosecond-Pulsed-Current in Vacuum

Characteristics of Electrical Explosion of Single Wire in a Vacuum and in the Air

“Breakdown” of stratified electrical explosion products: Plasma development and its mechanical effect

Experimental Investigation on the Energy Deposition and Expansion Rate under the Electrical Explosion of Aluminum Wire in Vacuum