Abstract:BackgroundMonte Carlo simulations provide accurate models of nuclear medicine imaging systems as they can properly account for the full physics of photon transport. The accuracy of the model included in the maximum-likelihood–expectation-maximization (ML-EM) reconstruction limits the overall accuracy of the reconstruction results. In this paper, we present a Monte Carlo-based ML-EM reconstruction method for pinhole single-photon emission computed tomography (SPECT) that has been incorporated into the SIMIND Monte Carlo program. The Monte Carlo-based model, which accounts for all of the physical and geometrical characteristics of the camera system, is used in the forward-projection step of the reconstruction, while a simpler model based on ray-tracing is used for back-projection. The aim of this work was to investigate the quantitative accuracy of this combination of forward- and back-projectors in the clinical pinhole camera GE Discovery NM 530c.ResultsThe total activity was estimated in 99mTc-filled spheres with volumes between 0.5 and 16 mL. The total sphere activity was generally overestimated but remained within 10% of the reference activity defined by the phantom preparation. The recovered activity converged towards the reference activity as the number of iterations increased. Furthermore, the recovery of the activity concentrations within the physical boundaries of the spheres increased with increasing sphere volume. Additionally, the Monte Carlo-based reconstruction enabled recovery of the true activity concentration in the myocardium of a cardiac phantom mounted in a torso phantom regardless of whether the torso was empty or water-filled. A qualitative comparison to data reconstructed using the clinical reconstruction algorithm showed that the two methods performed similarly, although the images reconstructed using the clinical software were more uniform due to the incorporation of noise regularization and post-filtration in that reconstruction technique.ConclusionsWe developed a Monte Carlo-based reconstruction method for pinhole SPECT and evaluated it using phantom measurements. The combination of a Monte Carlo-based forward-projector and a simplified analytical ray-tracing back-projector produced quantitative images of acceptable image quality. No explicit calibration is necessary in this method since the forward-projector model maintains a relationship between the number of counts and activity.

Calibration of Pinhole Microspect System Using Line Sources

Calibration of pinhole MicroSPECT using a single point source

Calibrating Light Sources by Using a Planar Mirror.

Quantitative Accuracy Assessment and Optimization of SPECT Geometrical Calibration

System Calibration and Statistical Image Reconstruction for Ultra-High Resolution Stationary Pinhole SPECT

High Accuracy Geometrical Calibration for Half-Mm Animal Spect Imaging

Characterization of pinhole SPECT acquisition geometry

Virtual Point Source Efficiency Calibration Method for Voluminous Sample of Radio-Xenon Based on Efficiency Function of Point Source

Geometrical Calibration of a PET-scanner-based Multi-Pinhole SPECT Using LYSO Background Radiation

Simulation and Validation of Point Spread Functions in Pinhole SPECT Imaging

Virtual Point Source Synthesis method for 3D Scintillation Detector Characterization

Monte Carlo-based quantitative pinhole SPECT reconstruction using a ray-tracing back-projector

Sub-Detector Unit Timing Calibration for Brain Pet Based on L1-Norm Constraint

A Subpixel Calibration Strategy for Micro-Raman Spectrometer in Subvisible Particles Traceable Detection

Angular Response of ‘Pin-Hole’ Imaging Structure Measured by Collimated Β Source

A SVD-based Method to Assess the Uniqueness and Accuracy of SPECT Geometrical Calibration.

Accurate Iterative Reconstruction in Multi-pinhole SPECT Based on Simulation Point Source Measurement

Novel Calibration Method for Magnetic Source in Magnetic Tracking System

A Maximum Likelihood Gamma Positioning Method with Accurate Calibration of the Mean Detector Response Function in a Clinical SPECT Detector

Feasibility Study on X-ray Source with Pinhole Imaging Method

Geometrical Calibration for an Animal Pet Converted Spect