Abstract:In response to the increased emphasis on reducing carbon emissions, the demand for lightweight, high-performance structural materials is quickly increasing, and Mg alloys, because of their having the lowest density among the common engineering metals, have demonstrated considerable advantages and prospective applications in contemporary industry. High-pressure die casting (HPDC), owning to its high efficiency and low production cost, is the most extensively utilized technique in commercial Mg alloy applications. The high room-temperature strength-ductility of HPDC Mg alloys plays an important role in their safe use, particularly in the automotive and aerospace industries. With respect to HPDC Mg alloys, their mechanical properties highly rely on their microstructural characteristics, particularly the intermetallic phases, which are further dependent on the alloys' chemical compositions. Therefore, the further alloying of traditional HPDC Mg alloys, such as Mg-Al, Mg-RE, and Mg-Zn-Al systems, is the most adopted method to further improve their mechanical properties. Different alloying elements lead to different intermetallic phases, morphologies, and crystal structures, which can have helpful or harmful effects on an alloy's strength or ductility. The methods aimed at regulating and controlling the strength-ductility synergy of HPDC Mg alloys have to arise from an in-depth understanding of the relationship between the strength-ductility and the components of the intermetallic phases of various HPDC Mg alloys. This paper focuses on the microstructural characteristics, mainly the intermetallic phases (i.e., components and morphologies), of various HPDC Mg alloys with good strength-ductility synergy, aimed at providing insight into the design of high-performance HPDC Mg alloys.

Fluidity Of Mg-Al-Ca Alloys In The High-Pressure Die Casting Process

Fluidity of Alloys Under High-Pressure Die Casting Conditions: Flow-Choking Mechanisms

Fluidity of Mg-Al Alloys and the Effect of Alloying Elements

Influence of Melt Flow in the Gating System on Microstructure and Mechanical Properties of High Pressure Die Casting AZ91D Magnesium Alloy

Fluidity of AZ91D and Mg–3Nd–0·2Zn–Zr (Wt-%) Magnesium Alloys: Response to Pouring and Mould Temperature

Fluidity of Pure Aluminum in a Narrow Channel Die Gap during Die Casting

Microstructure and Mechanical Properties of Melt-Conditioned High-Pressure Die-Cast Mg-Al-Ca Alloy

Study on Pressure Variations in the Mold of Magnesium Alloy Die Castings

Influence of Hydrostatic Pressure on the Primary Phase Structure of Zr65cu27.5al7.5 Amorphous Alloys During Casting

Study on Interfacial Heat Transfer Coefficient at Metal/die Interface During High Pressure Die Casting Process of AZ91D Alloy

Effect of Mg on the Fluidity of Zinc Alloys

Effects of Alloy Materials and Process Parameters on the Heat Transfer Coefficient at Metal/Die Interface in High Pressure Die Casting

Effects of Process Parameters on the Macrostructure of a Squeeze-Cast Mg-2.5 Mass%nd Alloy

Melt-Conditioned, High-Pressure Die Casting of Mg–Zn–Y Alloy

A high performance Mg-Al-Ca alloy processed by high pressure die casting: Microstructure, mechanical properties and thermal conductivity

Low-pressure die casting of magnesium alloy AM50: Response to process parameters

MELT CONDITIONED HIGH PRESSURE DIE CASTING (MC-HPDC) OF Mg-ALLOYS

Interfacial Heat Transfer Behavior at Metal/die in Finger-Plated Casting During High Pressure Die Casting Process

Microstructural Characteristics of High-Pressure Die Casting with High Strength-Ductility Synergy Properties: A Review

Influence of Different High Pressure Die Casting Processes on 3D Porosity Distribution of Mg-3.0Nd-0.3Zn-0.6Zr Alloy

Effects of different holding pressures on the microstructure and mechanical properties of Al-5.9Zn-2.2Mg-1.8Cu alloy