Abstract:The catalytic activity and stereospecificity of olefin polymerization by using heterogeneous TiCl4/MgCl2 Ziegler-Natta (Z-N) catalysts are determined by the structure and nature of active centers, which are mysterious and fairly controversial. In this work, the propylene polymerization kinetics under different polymerization temperatures by using Z-N catalysts were investigated through monitoring the concentration of active centers [C*] with different tacticity. SEM was applied to characterize the catalyst morphologies and growing polypropylene (PP) particles. The lamellar thickness and crystallizability of PP obtained under different polymerization conditions were analyzed by DSC and SAXS. The PP fractions and active centers with different tacticity were obtained with solvent extraction fractionation method. The catalytic activity, active centers with different tacticity and propagation rate constant kp, fragmentation of the catalyst, crystalline structure of PP are correlated with temperature and time for propylene polymerizations. The polymerization temperature and time show complex influences on the propylene polymerization. The higher polymerization temperature (60 °C) resulted higher activity, kp and lower [C*], and the isotactic active centers Ci* as the majority ones producing the highest isotactic polypropylene (iPP) components showed much higher kp when compared with the active centers with lower stereoselectivity. Appropriate polymerization time provided full fragmentation of the catalyst and minimum diffusion limitation. This work aims to elucidate the formation and evolution of active centers with different tacticity under different polymerization temperature and time and its relations with the fragmentation of the PP/catalyst particles, and provide the solutions to the improvement of catalyst activity and isotacticity of PP.

Study on Kinetics of Propylene Polymerization at Different Temperatures Via Monte Carlo Simulation

Kinetics Of Propylene Bulk Polymerization With A Spherical Ziegler-Natta Catalyst

Modeling for the Diffusion Limitation of Free Radical Polymerization

Monte Carlo Simulation of Propylene Polymerization (I) Effects of Impurity on Propylene Polymerization

Effect of Temperature Switching and Dynamic Phase Equilibrium on Polymer Microstructure in Condensed-Mode Operation

Molecular Dynamics Simulation of in Situ Polymerization: Chain Conformation Transition

High temperature polymerization of propylene catalyzed by MgCl2-supported Ziegler–Natta catalyst with various cocatalysts

Coupled-single-particle and Monte Carlo model for propylene polymerization

Temperature effect on the kinetic profile of Ziegler–Natta catalyst in propene polymerization

Modeling of the Propylene Polymerization Catalyzed by Single‐/multi‐active Site Catalyst: A Monte Carlo Study

Highly active Ziegler-Natta Catalysts for propylene polymerization (2) effects of Al/Ti ratio and polymerization temperature

Modeling the Effect of Polymerization Rate on the Intraparticle Mass and Heat Transfer During Propylene Polymerization in A Loop Reactor

Monte Carlo Simulation of Gas Phase Polymerization of 1,3‐butadiene. Part II: Kinetics Optimization and Confirmation

Effect Of The Polymerization Temperature On The Copolymerization Of Butadiene And Isoprene Catalyzed By Supported Ziegler-Natta Catalyst

Temperature effect on propylene polymerization behavior over Ziegler-Natta catalyst with different cocatalyst systems

Influence of Cocatalyst on High Temperature Polymerization of Propylene Catalyzed by Ziegler-Natta Catalyst

Role of Hydrogen in Propylene Polymerization Catalyzed by Ziegler-Natta Catalysts

Polymerization Kinetics of Propylene with the MgCl2-Supported Ziegler-Natta Catalysts—Active Centers with Different Tacticity and Fragmentation of the Catalyst

Multiple Active Site Monte Carlo Model for Heterogeneous Ziegler‐Natta Propylene Polymerization

Simulation of Effects of Reactive Impurities on Propylene Polymerization in Loop Reactors Through Generation Function Technique

Studies on Kinetics of Ethylene-Propylene Gas-Phase Copolymerization