Abstract:Plasma spraying has been widely applied to deposit ceramic coatings and is also considered as promising cost-effect manufacturing process to deposit electrolyte and ceramic interconnect for solid oxide fuel cells. However, it is generally difficult to deposit highly dense electrolyte and interconnect which can be directly applied to SOFC operation in the as-prepared state following the conventional process routine. In this paper, a novel approach based on the critical bonding temperature concept is presented to prepare dense electrolytes by plasma spraying. YSZ and LSGM are used as typical electrolytes, and LaxSr1-xCrO3 and LaxSr1-xTiO3 are used as typical interconnect. The individual ceramic functional layers are deposited at a deposition temperature higher than the critical bonding temperature. The compositions, microstructure, electric properties and gas permeability of different ceramic deposits are characterized. It is revealed that both plasma-sprayed electrolytes and interconnects present a gas permeability less than 1x10-7 cm4gf-1s-1 and can be directly applied to SOFC high temperature operation. Moreover, the deposited electrolytes present an ionic conductivity of over 80% sintered bulk materials. Along with the composition control approach during plasma spraying, high performance electrolyte and ceramic interconnect are deposited by atmospheric plasma spraying. Moreover, the excellent performance of the electrolyte and interconnect is also demonstrated by the output performance of assembled SOFC cells with the APSed functional layers.

Plasma Spraying of Ceramic Coatings and Their Applications to Solid Oxide Fuel Cells

Microstructure Development For Application Of Thermal Sprayed Ceramic Coatings To Manufacturing Of Solid Oxide Fuel Cells

Novel Approaches to Prepare the High Performance Dense Electolyte and Interconnect Applicable to SOFC by Atmospheric Plasma Spraying

Influence of Through-Lamella Grain Growth on Ionic Conductivity of Plasma-Sprayed Yttria-Stabilized Zirconia As an Electrolyte in Solid Oxide Fuel Cells

Breakthrough in Atmospheric Plasma Spraying of High-Density Composite Electrolytes: Deposition Behavior and Performance of Plasma-Sprayed GDC-LSGM on Porous Metal-Supported Solid Oxide Fuel Cells

Recent Advances in Microstructural Control Via Thermal Spraying for Solid Oxide Fuel Cells

Plasma spray coating on interconnector toward promoted solid oxide fuel cells and solid oxide electrolysis cells

Performance of YSZ Electrolyte Layer Deposited by Atmospheric Plasma Spraying for Cermet-Supported Tubular SOFC

Development of a Ni/Al 2 O 3 Cermet-Supported Tubular Solid Oxide Fuel Cell Assembled with Different Functional Layers by Atmospheric Plasma-Spraying

Influence of Atmospheric Plasma-Sprayed Composite Cathode on the Performance of Solid Oxide Fuel Cells

Effects of protective coating prepared by atmospheric plasma spraying on planar SOFC interconnect

Performance of Tubular Solid Oxide Fuel Cell Assembled with Plasma-Sprayed Sc2O3–ZrO2 Electrolyte

Structured La0.6Sr0.4Co0.2Fe0.8O3-δ cathode with large-scale vertical cracks by atmospheric laminar plasma spraying for IT-SOFCs

Microstructure and Electrochemical Behavior of a Structured Electrolyte/LSM-Cathode Interface Modified by Flame Spraying for Solid Oxide Fuel Cell Application

Preparation of yttria-stabilized zirconia electrolyte via atmospheric plasma spraying for metal-supported solid oxide fuel cells

Development of ScSZ Electrolyte by Very Low Pressure Plasma Spraying for High-Performance Metal-Supported SOFCs

Suspension Plasma Spraying to Manufacture Electrodes for Solid Oxide Fuel Cell (SOFC) and Solid Oxide Electrolysis Cell (SOEC)

Microstructures and Electrochemical Behavior of LSM Cathode with a Structured Electrolyte Modified by Flame Spraying

Plasma Glow Discharge as a Tool for Surface Modification of Catalytic Solid Oxides: A Case Study of La0.6Sr0.4Co0.2Fe0.8O3−δ Perovskite

Effect of Composition of NiO/YSZ Anode on the Polarization Characteristics of SOFC Fabricated by Atmospheric Plasma Spraying

Plasma Glow Discharge As A Tool For Surface Modification Of Catalytic Solid Oxides: A Case Study Of La0.6sr0.4co0.2fe0.8o3-Delta Perovskite