Abstract:Since displacement parameters can describe the seismic performance of structures more scientifically and intuitively, displacement-based seismic design methods have become a research hotspot in the field of earthquake engineering. Displacement design spectrum is an essential approach for determining the seismic load in displacement-based seismic design methods. However, the current version of the Chinese seismic design code（after this referred to as the code） does not have relevant provisions on the displacement design spectrum. A displacement design spectrum method adapted to the code was proposed in this work based on the characteristics of the actual displacement response spectrum of ground motions to facilitate practical applications. This method does not modify the code parameters but only adds two parameters: control period T D and peak ground displacement（PGD）, and the added parameters have a one-to-one correspondence with the relevant code parameters. In view of the fact that the force-based seismic design method still plays a dominant role in engineering practice, the proposed displacement design spectrum can be transformed into the acceleration design spectrum. To avoid contradiction with the code, the proposed acceleration design spectrum is consistent with the code design spectrum when the period is less than 5T g （site characteristic period）. In the long periods, the proposed displacement design spectrum can reflect the main characteristics of the average displacement response spectrum of ground motions, and the proposed acceleration design spectrum is consistent with the average acceleration response spectrum. The research work can serve for the engineering applications of the displacement-based seismic design methods and guide revising the content about the design spectrum in the code.

Seismic fortification criterion and importance factor for seismic design code

Seismic fortification criterion and importance factor for seismic design of highway bridges

Seismic Force Modification Factor for Ductile Structures

Static and dynamic inelastic P -Δ effect for seismic design

SEISMIC-FORCE-MODIFICATION FACTOR FOR STRUCTURES WITH BILINEAR ELASTOPLASTIC MODEL

Composition of Structural Behavior Factors in Codes of China, Japan,Europe and USA for Earthquake-Resistance and Their Corresponding Ductility Demands

Study on Strength Reduction Factors Consid-Ering the Effect of Classification of Design Earthquake

Seismic Strengthening Design Ground Motion Parameters for Existing Buildings with Different Importance

State-of-art of applications of strength reduction factors in seismic design codes

Seismic Hazard Expression in Risk Assessment

Seismic Performance Factors of RC Frames with Infilled Walls Based on APOA and IDA

Studies on Seismic Demand Spectra Based on Strength Reduction Factor

Research on seismic strengthening design ground motion parameters for existing buildings based on seismic hazard characteristic zone

Some thoughts on earthquake action provision in seismic design code

Seismic Fortification Intensity Evaluation by a Cost-Benefits Analysis– Case Study of Three Bridges

Computing Method of Seismic Force and Input Seismic Wave in Japanese Structural Seismic Design Code

A displacement design spectral method adapted to the Chinese seismic design code

Optimal fortification load decision-making and life-cycle cost design for aseismic structures according to Chinese codes

A study on seismic performance levels of building structures

Analysis of influence of dynamic characteristics of structures on strength reduction factors

A Method for Determination of Seismic Target Performance Level of Reinforced Concrete Frames