Abstract:Scour of pile group foundations is a common hazard for cross-river bridges and can produce considerable damage to piles in earthquake-prone regions. The fragility-based performance assessment for pile group supported bridges subjected to earthquake and scour hazards has drawn increasing attention from engineering practice and academic communities. Such assessment requires numerical models that are computationally efficient and accurate in describing the mechanical behavior associated with the complex soil-pile interaction of these soil-bridge systems. Additionally, selecting an optimal ground motion intensity measure (IM) is generally required for such assessments. However, modeling the pile group effect for seismically excited pile groups and the optimal IM for the scoured bridges have not been well addressed in previous related studies. To this end, a practical pile group effect modeling approach is adopted in this study and validated by a set of shake table tests on scoured pile group bridge available in the literature. Based on the validated numerical modeling approach for the soil pile interaction, a series of coupled soil-bridge models are generated considering the structural and soil parameter uncertainty and analyzed in the OpenSees platform. The optimal IM for various engineering demand parameters (EDPs) is identified from thirty-nine scalar IM candidates through the criteria of efficiency, practicality, sufficiency, and hazard computability. Finally, a straightforward form of probabilistic seismic demand model (PSDM), incorporating the effect of scour depth changes, is developed for pile group supported bridges. Results show that the increase of scour depth significantly increases the curvature demand of a pile group and statistically reduces the embedded depth of the belowground plastic hinge of the pile shaft. The rank of optimal IM candidates directly depends on the selection criteria of an optimal IM and the selection of EDP. In addition, the scour depth slightly affects the rank of optimal IMs. Generally, VSI , PGV, and S v ,1.0 are recommended for the probabilistic seismic demand analysis of pile group supported bridges in sandy soils with scour potentials.

Seismic Fortification Intensity Evaluation by a Cost-Benefits Analysis– Case Study of Three Bridges

Seismic Damage of Long Span Steel Tower Suspension Bridge Considering Strong Aftershocks

Effectiveness of CFRP Seismic-Retrofit of Circular RC Bridge Piers under Vehicular Lateral Impact Loading

Study on time-varying seismic vulnerability and analysis of ECC-RC composite piers using high strength reinforcement bars in offshore environment

Research on Evaluation System of Bridge Disaster Resilience

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Multihazard resilience and sustainability evaluation of coastal RC bridges under sequential earthquake-tsunami events

Enhancing Bridge Performance Following Earthquakes Using Markov Decision Process

Construction Stage Seismic Vulnerability Evaluation of a Continuous Girder Bridge with the Cast-in-Place Cantilever Construction Method

Comparison of vulnerabilities in typical bridges using macroseismic intensity scales

An extended probabilistic demand model with optimal intensity measures for seismic performance characterization of isolated bridges under coupled horizontal and vertical motions

Performance-Based Seismic Fragility and Residual Seismic Resistance Study of a Long-Span Suspension Bridge

Seismic Fragility Assessment of an Existing Multi-Span RC Bridge Equipped with Risk Mitigation Systems

Seismic evaluation of reinforced concrete bridges using capacity‐based inelastic displacement spectra

Transverse seismic damage mode identification of deteriorating simply-supported highway bridges

Numerical failure analysis of a continuous reinforced concrete bridge under strong earthquakes using multi-scale models

Probability based seismic risk analysis of bridge structures

Critical Assessment of Intensity Measures for Seismic Response of Italian RC Bridge Portfolios

Optimal intensity measure selection and probabilistic seismic demand model of pile group supported bridges in sandy soil considering variable scour effects

Extreme value distribution and dynamic reliability estimation of high-pier bridges subjected to near-fault impulsive ground motions

Analysis Of Seismic Response Of Integral Bridge Abutments