Abstract:The single-pass geosynchronous synthetic aperture radar interferometry (GEO InSAR) adopts the formation of a slave satellite accompanying the master satellite, which can reduce the temporal decorrelation caused by atmospheric disturbance and observation time gap between repeated tracks. Current formation design methods for spaceborne SAR are based on the Relative Motion Equation (RME) in the Earth-Centered-Inertial (ECI) coordinate system (referred to as ECI-RME). Since the Earth rotation is not taken into account, the methods will lead to a significant error for the baseline calculation while applied to formation design for GEO InSAR. In this paper, a formation design method for single-pass GEO InSAR based on Coordinate Rotational Transformation (CRT) is proposed. Through CRT, the RME in Earth-Centered-Earth-Fixed (ECEF) coordinate system (referred to as ECEF-RME) is derived. The ECEF-RME can be used to describe the accurate baseline of close-flying satellites for different orbital altitudes, but not limited to geosynchronous orbit. Aiming at the problem that ECEF-RME does not have a regular geometry as ECI-RME does, a numerical formation design method based on the minimum baseline error criterion is proposed. Then, an analytical formation design method is proposed for GEO InSAR, based on the Minimum Along-track Baseline Criterion (MABC) subject to a fixed root mean square of the perpendicular baseline. Simulation results verify the validity of the ECEF-RME and the analytical formation design method. The simulation results also show that the proposed method can help alleviate the atmospheric phase impacts and improve the retrieval accuracy of the digital elevation model (DEM) compared with the ECI-RME-based approach.

Formation Optimized Design for the Height Measurement of InSAR Using Distributed Micro-Satellites

A Formation Design Approach of the Distributed Spaceborne InSAR Based on Height-measure Optimal Accuracy Value

Optimization and Design of Baseline Direction of Satellite InSAR System

Optimization Design Approach of Distributed Spaceborne InSAR Formation

Formation Design of Distributed Satellites InSAR Based on DEM and GMTI

Multi-baseline Formation Configuration Optimization of Spaceborne InSAR System Based on Genetic Algorithm

Height-Measure Accuracy of INSAR in Spaceborne Parasitic SAR System and Flying Formation Design

Interferometric baseline design and performance evaluation for 3-dimensional formation flying SAR satellites system

Formation Design and Baseline Optimization of GEO SAR Interferometry

Configuration, Orbit Design of InSAR Formation Based on Mean Elements

Restriction of Spaceborne Multistatic InSAR Formation Configuration Design

Baseline Design and Performance Analysis for Distributed Spaceborne Interferometric Synthetic Aperture Radar

Formation Design for Single-Pass GEO InSAR Considering Earth Rotation Based on Coordinate Rotational Transformation

Formation Flying Orbit Design for the Distributed Synthetic Aperture Radar Satellite

Height-measure Accuracy Analysis of Distributed Spaceborne InSAR System

An Optimal Baseline Design and Performance Analysis in Distributed Spaceborne SAR System

Configuration angle determination and configuration optimal design of distributed SAR satellite system

The Optimal Formation Configurations for Both GMTI and DEM Using Distributed Satellites InSAR

The Optimal Across-Track Baseline of Distributed Small Satellites Synthetic Aperture Radar for Terrain Elevation Measurement

Formation Configuration, Orbit Design and Baseline Performance Analysis Based on DEM and GMTI

New Method of Formation Design for Both GMTI and InSAR Using Distributed Satellites