A comparative study on monotonic and cyclic shear behavior of saturated loose sand under complex stress condition

Maotian Luan,Chengshun Xu,Yang He,Ying Guo,Zhendong Zhang

DOI: https://doi.org/10.3969/j.issn.1000-1301.2006.01.030

2006-01-01

Abstract:In this paper, a comparative study on undrained monotonic and cyclic shear behavior of saturated loose sand under complex stress condition is made on the basis of experimental test by using the soil static and dynamic universal triaxial and torsional shear apparatus established in Dalian University of Technology. The different combinations of initial consolidation stress condition and monotonic or cyclic shear stress patterns are considere in the soil tests. It is shown through comparison that the strain-softening or hardening characteristics are closely associated with the deformation features of flow-slide deformation and the cyclic mobility of loose sands. Once the cyclic stress enters the strain-softening region given by monotonic shear loading, the flow-slide deformation will occur. In both monotonic and cyclic shear loading, the effective deviator stress ratio attained at the steady state reduces gradually with the increase of the orientation angle of major principal stress with respect to the vertical direction. Under the condition with the same coefficient of initial intermediate principal stress, the effective deviatoric stress ratio at which a remarkable shear dilation occurs and the effective deviatoric stress ratio peak at which a final steady state is formed in cyclic shear loading are respectively almost same as the effective deviatoric stress ratio at the arrival of phase transformation state and the finally attained steady effective deviatoric stress ratio. However, the behavior of generation and build-up of pore-water pressure is completely different in monotonic and cyclic shear loading. With the increase of the direction angle of initial principal stress, the maximum pore water pressure generated in the cyclic shear reduces gradually while the maximum pore water pressure caused by monotonic shear loading test increases gradually.