Abstract:Huge and critical structures, such as fuel storage tanks and nuclear power plants, are often built on dense sandy grounds, which may cause excessive plastic deformations under multidirectional cyclic shearing conditions caused by earthquakes. The lack of investigation of sand behavior under multidirectional loading may lead to unsafe designs, and thus significantly increase the maintenance cost for infrastructures during their long operational time, which might be longer than 100 years. This study presents a numerical investigation on the liquefaction behavior of dense sand under bidirectional cyclic simple shear using the discrete element method. The bidirectional cyclic simple shear tests with varying stress trajectories on the deviatoric stress plane, including figure-8, circular, and straight lines, were conducted. Additionally, a series of unidirectional loading tests was conducted in the simulation scheme for comparison purposes. The effect of the initial static shear on the cyclic behavior and liquefaction resistance of granular materials was examined. Four loading categories, including full reversal, partial reversal, intermediate reversal, and no reversal, were implemented in the numerical simulations. Although the presence of the initial static shear may enhance the cyclic resistance of granular samples under unidirectional loading, it mitigates the liquefaction resistance and promotes the failure of specimens under bidirectional shearing conditions. The microscopic analysis was performed to reveal the relationship between the fabric evolution and external loading, which can provide profound insights into the underlying mechanism of the cyclic behavior and liquefaction susceptibility of granular material when both the bidirectional shearing and initial static shear effects are considered.

Discrete element simulation of cyclic simple shear behavior of sandy soil with constant amplitude of shear strain

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Undrained Cyclic Behavior of Granular Materials Considering Initial Static Shear Effect: Insights from Discrete Element Modeling

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Novel Undrained Servomechanism in Discrete-Element Modeling and Its Application in Multidirectional Cyclic Shearing Simulations

Hypoplastic Model for Sand under Multidirectional Shearing Conditions Considering Fabric Change Effect

Discrete Element Simulations of Drained Granular Material Response under Multidirectional Rotational Shear

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Cyclic Behavior of Saturated Soft Clay under Stress Path with Bidirectional Shear Stresses

Effect of Drained Static Shear on Cyclic Deformation Behavior of K-0-consolidated Sand

Experimental research on reinforcement-soil interface stiffness and damping ratio under cyclic shearing

Permanent Deformation Characteristics of Saturated Sand under Cyclic Loading

Stiffness Degradation and Plastic Strain Accumulation of Clay under Cyclic Load with Principal Stress Rotation and Deviatoric Stress Variation

Energy-based Evaluation of Undrained Cyclic Behavior of Marine Soft Clay under Multidirectional Simple Shear Stress Paths

Experimental Study on Degradation of Stiffness of Saturated Soft Clay under Undrained Cyclic Loading

Study on dynamic stress-strain relationship of soft clay considering degradation of stiffness under cyclic loading

Cyclic shearing behavior of K0-consolidated day and its rheological simulation

Influence of Cyclic Loading History on Small Strain Shear Modulus of Saturated Clays

Experimental Study on Cyclic Simple Shear Test of Coastal Tidal Soft Soil

Effects of Initial Shear Stress on Cyclic Behavior of Saturated Soft Clay